Ads by Google
Characteristic1. Fast-rising temperatureHigh-efficiency electroheat pipe is adopted in the pot. After adding some circulation water into the pot, packaging stuff can be heated from 20 to 121 in 10-15 min.2. Stable temperature and even heat distribution in the potIn the hot water spraying system a series of nozzles are installed in the four angles of every pallet in the processing tank which leads to the full contact between atomized hot water and the product so as to ensure the same temperature among areas in the equipment.3. Energy effectiveSteam condensate recovery system can recover the condensate produced during heating in the heat exchanger and can be used as circulation water for sterilization. Thus, it can reduce the energy consumption. 4. Indirect heating and cooling, prevention of secondary pollution Circulation water is heated or cooled indirectly by plate heat exchanger and it keeps bacteria-free condition during heating or cooling.After the sterilization, water drops in the pot and the surface of the packaging bag will be blown to dry. No white scale spot will be left. The package bag is clean and transparent.5. Perfect pressure control suitable for the sterilization of gas packagingOur patented pressure balance system is crucial to the sterilization of gas packaging as gas packaging needs accurate pressure balance and control and PACKACEcontrol system can make continuous inspection on the temperature and pressure in the processing tank and make corrections on the pressure in the tank so as to make it consistent with the pressure in the package. It can also sterilize packages containing any percentage of filling air or gas and vacuum sealed packages and will not damage or deform the package and stuff inside the package.6. Perfect rise and drop of the temperature suitable for the sterilization of fragile bottle Circulation water will be heated from normal temperature by heat exchanger when the temperature rises and cooled down from current temperature by heat exchanger when the temperature drops so as to avoid the breakage of glass bottle due to sharp time difference.7. Automatic systemThe whole sterilization process is controlled by PLC. It is a one-time action without manual operation. It utilizes the chart plate and screen touch control. All time intervals are controlled by the simulate sensor and automatic valve. The digital exhibition of pressure and temperature makes it applicable to input any pre-programmed pressure and temperature models into the computer. The computer can hold 100 sterilizing formulae.8. Simulate temperature control system where the setting of multi-stage heating system is available.According to different request for various foods, the different cooling procedure can be set at any time. The sterilizing method by multi-stage heating can minimize the heat on food, which can keep its original flavor, taste, nutrition and color to the utmost and make every kind of food sterilized in its best condition. The accuracy of the sterilizing temperature is up to ±0.3 so as to avoid over boiling or incomplete sterilization. 9. Function of measuring F-alueEvery retort produced by Zhongtai can be equipped with F-alue measuring instrument. The F-alue software can make the F-alue calculation every 3 seconds. All sterilizing data including sterilizing conditions, F-alue, time-temperature curve, time-pressure curve and so forth can be saved or printed after the processing of data processing software to serve the production management.
Electrothermal autoclave