1.What is oxy-hydrogen thermocouple welding machine
Oxy-hydrogen thermocouple welding machine is able to separate clean soft water (H2O) into hydrogen and oxygen gases, using a small amount of electric power through a special process. These gases are then mixed and delivered for use in a wide variety of applications, such as heating, brazing, cutting, etc. which currently use LPG or other gas for fuel. When burned, this fuel generates no green house gases or pollutants,and burns at virtually 100% efficiency. This certainly has the potential for becoming the most significant advancement in fuel for the 21st century.
2. Why I used oxy-hydrogen thermocouple welding machine
2.1 Maximum Safety a. Steady, reliable fuel delivery. Fuel is available immediately after machine is switched on. No volatile fuel tanks which can rupture or explode.b. Multiple safety devices, including overheating and in-sufficient water cut-off switches, will automatically turn off power to ensure the safety of both equipment and user.
2.2 Environmentally Friendly a. The Fuel generated by our machines burns completely without creating pollutants, toxic fumes, or public nuisance.b. Does not generate hydrocarbons, carbon monoxide, or carbon dioxide.
2.3 High Mobility a. Our generators come equipped with wheels to facilitate moving the generators to the job, not the other way around.b. Our generator immediately generates fuel as needed, eliminating the need for dangerous awkward gas tanks.c. Fuel can be used for long periods of time without overheating peripheral equipment
2.4 High Temperature & Calorific value
a. Calorific value is 34000Kcal/kg
b.The flame temperature is over 2800°,it can melt refractory metals and none-metals
2.5 Low Cost & Maximum Economya. Fuel is generated using only electricity and clean soft water.b. Both economical and practical when compared to the currently used LPG, Propane, or acetylene.
2.6 Low Heat Dispersal Use of this fuel provide a more focused heat source with less heat loss, maintaining a more comfortable, safer, lower fatigue working environment.
3. Okay Energy Oxy-hydrogen Thermocouple Welding Machine Technical Parameters:
|AC Voltage Requirement (V)||220/110|
|DC Voltage &Current (A)||5V 60A|
|Max Gas Output||200L/h|
|Max. Working Pressure (kg/cm2)||1.3|
|Max. Water Consumption (L/h)||0.11|
|Max. Flame Modifier Consumption (L/h)||0.1|
|Flame Modifier Feed||manual|
|Dimensions - L*W*H (mm)||620*280*360|
|Gross Weight (kg)||33|
|Ventilation Space Requirement (mm)||200 in each direction|
4. About Okay Energy Technology
Okay Energy Co., Ltd specializes in research, manufacturing oxy-hydrogen generator, owned many patents.
1) Patented Integration of Water Electrolysis Cell FormingOur electrolysis cell Integration is used in Large Module in order to make sure No Leakage, Explosion-proof, and Long Life Cycle.
2) Patented Electrolysis Power Supply based SCM Our Power Supply is special designed for Electrolysis.For example: 2.1 Constant current control by temperature feedback control 2.2 Current adjust by user to meet the constant flux of oxy-hydrogen gas 2.3 Efficient energy conversion(AC TO DC) based IGBT 2.4 Special cooling design for working 24 hours continues.
3) Patented Multi-layer ANTI-FIRE Water Seal Technology Water Seal Device is important unit of oxy-hydrogen generator, this unit is designed for backfire-proof, It works 100% ok.
4) Automatic Water Level Detection Technology We design by ourselves, it used for detect the water level of the electrolysis cell and water -deposit tank. When water is too low, the alert lamp is light. When water is lowest, the power supply switches off to proof the oxy-hydrogen generator.
5) Water Automatic Replenishment TechnologyWhen water of the electrolysis cell is too low, the system will auto pump water from water-deposit tank.
6) High-efficiency Gas Water Separator TechnologyThis Technology is used to separate the water from gas in order to ensure the gas is pure. If the oxy-hydrogen gas has some water even little, the temperature of the oxy-hydrogen flame will become lower.
7) Electrolyte -Automatic Cycle Technology
We used static way to realize Electrolyte Cycle, don't use pump because the pump is a mechanic unit that is easily damaged.
portable oxyhydrogen thermocouple welding machine/okay energy oxy-hydrogen thermocouple welding machine