Carbon additive for steelmaking High Fixed Carbon content 98%Min Low sulphur 0.05%Max Low ash 0.5%Max Good absorptivity

We produce High-purity carbon additive for steelmaking .

Specification as follows :

Calcined Petroleum Coke	F.C(Min)	98.50%	98.50%	98.00%
	S(Max)	0.50%	0.50%	0.50%
	ASH(Max)	0.50%	0.80%	0.80%
	V.M(Max)	0.50%	0.70%	0.70%
	H2O(Max)	0.50%	0.50%	0.50%
	Size:	0.5-1mm,1-5mm,5-10mm,3-8mm,ect.

  Usage method: 1) Ingredients to adjust the carbon points, according to the requirements of carbon content of molten steel (iron) water, with the metal charge to join the middle or lower part of furnace, carbon absorption rate of up to 90% -95%, carbon strong medicine when you do not melt Play slag, or easily wrapped in a non-residue which affect the absorption of carbon. 2) Steel (iron) water melted, adjust the carbon points, can be added to the steel (iron) water surface, through the electric furnace smelting steel (iron) or artificial water, stirring vortex mixing dissolved carbon absorption, carbon absorption rate of about 85%.

Carbon additive for steelmaking FC98 low sulphur