cable tie fasten tool,cable tie gun HS-338 Stainless steel cable tie gun,cable tie gun,.

HS-338 Stainless steel cable tie gun,cable tie gun,cable tie tool,fasten toolInstalls

cable ties including standard, heavy standard, light heavy and cross section  stainless steel cable ties

Tightens cable ties and easily cuts off any excess using preset tension on the selector knob and the squeeze of the handle This lightweight cable tie installation tool is qualified as Military Specification Standard Part # MS90387-3 to meet your requirements

  

  to cut cable tie flush without any sharp edges.

Stainless steel cable tie gun

for stainless steel plate

fasten and automatio cut ties with adjustable bunding pressure

replacement ratchet set.

for cable tie thickness up to 03mm

width up to 7.9mm

for made by alnminum alloy.

Instructions for HS-338:

First thread the tail into the head of the cable tie. Adjust the wheel to the required tension for the cable tie. Place the tail and shaft of the cable tie into the solt at the tip of the gun barrel. Push the tie as far back onto the gun base as possible. The head must be touching the gun tip outside the tool. Squeeze the handle of the gun to pull the tie through the head making sure the head of the tie is always touching the tip of the gun. Keep pulling the handle until the tie is securely fastened around the desired object. The gun will automatically cut the excess tie off when it reaches maximum tension.

HS-338 Stainless steel cable tie gun, fastening tool, cable ties tool, tie gun