Welcome to ECVERY
hand puller
hand puller
Supplier Info
[China Supplier]
Contact Person : Ms. Li CANDY
Tel : 86-312-5909177
Fax : 86-312-5909277
Product Detail
1.capacity: 1 ton, 2ton, 3 ton 2.certification: CE & GS

Hand PullerTight line device is installed in the construction of overhead lines as tension conductors. Use first device on the tight wire or galvanized wire rope loose, and fixed in the cross arm, and with the clamp tool clamping wire, then pulling the special spanner. As the pawl anti-reverse effect, and gradually the rope, or galvanized iron wire on the ratchet drum, so that the wire to tighten. To tighten the wire fixed on the insulator. Then loosen the pawl, so that loose wire or galvanized wire, then release the clamp tool, and finally the wire or galvanized iron wire on the ratchet drum. Tight line device applications: construction, roads, bridges, metallurgy, mining, slope tunnels, wells and other infrastructure construction management protection of mechanical equipment.

Hand Puller
BQ-1(Ton)Double Gear,Single Cable, 2 Hooks10PC/CTN1921
BQ-2(Ton)Double Gear,Double Cable, 2 Hooks10PC/CTN2123
BQ-4(Ton)Double Gear,Double Cable, 2 Hooks10PC/CTN2830

hand puller

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.