Welcome to ECVERY
European type indoor TPR top plate swivel caster
European type indoor TPR top plate swivel caster
Supplier Info
[China Supplier]
Contact Person : Ms. Rounya Fenny
Tel : 86-662-2277731
Fax : 86-662-6112030
Product Detail
1.Top plate swivel caster 2.Made of pressed steel,zinc plated 3.double ballrace swivel head

European type indoor Thermoplastic rubber swivel caster

Item : 35XXXTPR

Wheel diameter : 60mm,,80mm,100mm,125mm

Wheel materials : Thermoplastic rubber

Fittings : Top plate swivel

Wheel bearings : Plain bearing

Load capacity : 50kg,60kg,70kg,80kg

Housing:

Made of pressed steel,zinc plated.

double ballrace swivel head

Wheel:

Material:Thermoplastic

Hardness:80±5 Shore A

Bearing type:Plain bearing

Temperature:-20°C~80°C

   

  

     Mark  

 Definition

      

Indicating dangerous situation which is critical for safety as incorrect use may inflict the personal death or serious injury.

 

Indicating dangerous situation which is critical for safety as incorrect use may inflict the personal death, serious injury or property damage.

 

Indicating dangerous situation as incorrect use may inflict the light personal injury or property damage.

Installation

*Select a model within the range of recommended load per 4 casters of product not exceeding the

maximum loads of equipment or carts.

*Tightly fasten the plate of both faces with bolts & nuts. not to have any gaps.

*Once the model is selected. manufacture the hole distance, hole size, tap & others of Top Plate &

Equipment Plate of selected model either identical or mountable.

How to use

*Following instruction must be complied when using the product, a caster making equipment or carts'

moving easier. Failure in compliance of following instruction may cause the damage on caster, physical

loss of equipment or personal injuries.*Distinguish Manual Driven Casters and Power Drive Casters as per the characteristic of product.  

*The moving of Manual Driven Casters should be made with a speed slower than 4km/h and Power

Driven Casters should be made with a speed slower than 20km/h.*Pay attention not to have the loads of equipment or carts laid to one side, as it may cause inclination.

 http://www.rounya.com               http://www.ry-caster.com

European type indoor TPR top plate swivel caster

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.