Product features
It has strong cohesive force and good two-way compatibility, avoid hollowing between the mortar and base plane.
The ready-mix product has uniform and stable performance, and can be used by adding water and latex after opening. It is convenient and environmental.
It provides good thixotropy, smooth construction, and improves the construction efficiency.
It has good water resistance and weather resistance.
It is non-toxic and harmless, non-corrosive flammable materials, convenience and safe.
Scope of application
It is suitable for all inorganic surface of outside the buildings, including plaster mortar, precast concrete, gypsum board, standard brick, and brick wall, etc.
Treatment of base plane
The base place should be smooth and strong, no dust, grease, release agents and batik materials, etc.
If the base plane is very uneven, leveling it with powder putty for exterior wall for one time.
The new plastered cement mortar surface should be maintained for more than 14 days before construction.
If the weather is too dry and hot, or the porosity of base plane is high, water the base plane and start construction after no clear water.
Construction technology
Mixing ratio: power: water= 25: (5~6)
Mix the interfacial agent in the proportion, stir with motor stirrer until even, standing for 5-10 minutes, and stir again will get better result.
Operate by knife or spray coating tool, drag by knife or the tool.
Attentions
The product is suitable for construction in the 5-40°C.
If adding too much water when stirring, should add more powders.
The mortar should be used within 4 hours.
Storage period
Keep in cold and dry place, unopened powder is valid for 1 year, additives is valid for 6 months.
Spec
25kg/bag
Technical parameters
Original strength | ≥0.7 |
Water resistance | ≥0.5 |
Bonding mortar