PB02 Adhesive&Base Coat - insulation board adhesive
TECHNICAL CHARACTERISTICS
1. water resistant
2. Excellent adhesion
3. Good flexural strength
4. Good impact resistance
5. Easy to use
Building Insulation Materials
WHERE TO USE
Building Insulation Materials is used as an embedding mortar applied over EPS (expanded polystyrene), XPS (extruded polystyrene) and mineral wool panels to embed the glass fiber mesh prior to application of finish coats.
Building Insulation Materials
MIXING INSTRUCTIONPB02 Building Insulation Materials is mixed in the following ratio:
25kg Base Coat:6.25ltr water
It is mixed using a high speed drill, allowed to stand for 10 minutes, remixed and used.
Building Insulation Materials
APPLICATION
When used as an adhesive, apply to the EPS board and press into place using a level.Do not allow adhesive to skin before fixing in place.When used as an embedding mortar apply a coat of PB02 Base Coat mix to the EPS board and embed the mesh using a trowel.Apply another coat of mix to the surface to ensure full cover of the mesh and an overall thickness of approximately 3mm.Clean tools and equipment with water after use.
Building Insulation Materials
CONSUMPTION
4-8kg/m2 with trowel application depend on the substrate.
Building Insulation Materials
PACKAGING
25kg paper sacks.
Building Insulation Materials
STORAGE
12 months in original packaging in a dry place.
PB02 Adhesive & Base Coat - insulation board adhesive,include EPS,XPS,Foam Glass, etc