Welcome to ECVERY
Thermal-Insulation Board Coating
Thermal-Insulation Board Coating
Supplier Info
[China Supplier]
Contact Person : Mr. Cao Jerry
Tel : 0086-20-87405183-806
Fax : 0086-20-87418670
Product Detail
Board Coating: 1) Strong adhesion and excellent weather resistance 2) Excellent crack, damp and permeability resistance

Board Coating Features and benefits:1) Strong adhesion and excellent weather resistance2) Thin mortar technology adopted, with 1.5 ~ 3mm thick mortar, so as to lower theweight of building and the cold and heat bridge in the insulation layers3) Excellent crack, damp and permeability resistance4) With proper flexibility, able to compensate the temperature difference stressbetween the light construction materials and outer decoration paints due to difference from expansion coefficients5) Safe, innocuous, anti-mildew and flameproofApplication scope:1) The finish protection layer of the surface of the polystyrene foam board in theexternal thermal insulation system2) The protection layer of the polystyrene foam board decoration line3) The interface treatment and finish render of such light boards as external wallfoam board decoration line, expanded perlite4) The render for high-class paintSubstrate preparation:The surface of the bottom material should be clear, free from grease or other loose substance.Instruction:1) Mix powder and water at ratio of 3.57:1 (i.e. 20kg powdered: 5.6kg water), thenstir with an electrical mixer until equal, lump-free is achieved; let it standfor 3-5 minutes, then re-stir and ready to use2) Apply it on the work surface with a trowel equally3) When it is used for the reinforced protection layer of the glass fiber of thepolystyrene foam and foam decoration line, equally apply it one the work surfacewith a trowel, then press down the fiber net with a trowel then trowel it even;after it dries for 24 hours, have the second construction, similar to the firstconstruction, mop the mortar onto the work surface, trowel it even, then letit maintain in the current state for 7 days, another process can be conductedSpecifications: 1) Tensile and bonding strength (with 20kg/m³ cement board):a) Normal strength: ≥0.1MPa b) Water resistance: ≥0.1MPac) Freezing-thawing resistance: ≥0.1MPa 2) Compressive strength / flexural strength:a) Water resistance: ≥0.1MPa 3) Operability time: 2.0±0.5hDosage:Control the thickness at 2.0-3.0mm, use trowel to mop the mortar, approx. 3.0-4.0kg/m²Precautions:1) The product had better be used at 5-40°C2) Other coating should not be done until the base coat is entirely dry and cured(approx. 3-7 days)3) Do not add water into the cured mortar and reuse itShelf life:Unopened bags can be stored for one year in a cool and dry environment.Packing:25kg/bag

Thermal-Insulation Board Coating

Related Products
Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.