Ads by Google
Kingflex Aircon outperforms in fire resistance, water vapor permeability and thermal conductivity features. Its unique formulati
PRODUCT OVERVIEW
All Kingflex elastomeric insulations are engineered and manufactured for HVAC and other industrial applications. With closed cell structure Kingflex insulations effectively retard heat flow and prevent condensation when properly installed. The environmental friendly materials are manufactured without the use of CFCs, HFCs or HCFCs. They are also formaldehyde free, low VOCs, fiber free, dust free and resistant to mold and mildew.
Kingflex Aircon outperforms in fire resistance, water vapor permeability and thermal conductivity features. Its unique formulation makes it an ideal choice for extreme design conditions such as high humidity and low line temperature.
KEY PERFORMANCE MEASURES
_297°F to+ 220°F (-183°C to .105°C) temperature range
0.08 perm-inch(1 .16x10-13 Kg/m*s"Pa)water vapor transmission
0.27 Btu-in.Jh*f ft2·°F:(0 .0 3 9W/m *K)thermal conductivity values
APPLICATIONS
Kingflex Aircon insulation is used to retard heat transmission and control condensation from chilled-water and refrigeration systems. It also efficiently reduces heat transfer for hot-water plumbing and liquid-heating and dual-temperature piping. Kingflex Aircon is ideal for applications in:
Air-conditioner, including hot gas piping
Icebox
Solar collectors
Automotive and diesel under hood, including air conditioning, heating
Slip the tubular Kingflex Aircon onto unconnected piping or, for connected piping, slit the insulation lengthwise and snap it over. Seal the joints and seams with KingGlue 520 adhesive. When installed outdoors, KingPaint, a weather-resistant protective finish, is recommended to be applied over the surface to achieve maximum UV protection.
All Kingflex insulation must be properly installed to ensure maximum efficiency and long lasting performance. Refer to the Kingflex Insulation Installation Manual for detailed instructions.
Property | Unit | Value | Test Method |
Temperature range | °F (°C) | -50-110°C | GB/T 17794 |
Density range | Ibs./ft3(kg/m3) | 40-95 | GB/T 6343 |
Thermal conductivity | W/m*k | 0°C , 0.040 | GB/T GB/T 10294 |
Water vapor permeability | _____ | >=5500 | GB/T 17794 |
Flame spread and smoke developed index | Class 1 & Class 0 | BS476 part 7 & part 6 | |
V0 | UL94 | ||
Water absorption, by volume | % | 0.2 | ASTM C209 |
Mold growth | - | Meet requirement | UL181 |
Bacterial resistance | Meet requirement | ASTM G22 | |
Fungi resistance | Meet requirement | ASTM G21/C1338 | |
Resistance to agent chemical | - | Stable performance to agent chemical | - |
Ozone resistance | - | good | ASTM D1149 |
Aging resistance | - | 150 hours, slight wrinkles, no cracks, holes or distortion | - |
Wall thickness (normal) sheet | In(mm) | 1/8”, 11/4”, 3/8”, 1/2”, 5/8”, 3/4”, 1”, 1-1/4”, 1-1/2”, 2” (3,6, 9, 13, 16, 19, 25, 32, 40, 50) | - |
Width, sheet | In(m) | 40”, 48”(1, 1.22) | - |
Length, sheet | Ft(m) | 36” (0.915) | - |
Wall thickness (normal) roll | In(mm) | 1/8”, 11/4”, 3/8”, 1/2”, 5/8”, 3/4”, 1”, 1-1/4”, 1-1/2”, 2” (3,6, 9, 13, 16, 19, 25, 32, 40, 50) | - |
Width, roll | In(m) | 40”, 48”(1, 1.22) | - |
Length, roll | Ft (m) | 98, 49, 33, 26, 23, 20, 13, 10, 10, 8 (30, 15, 10, 8, 7, 6, 4, 3, 2.5) | - |
heat insulation pipe for air conditioner