BACnet PIC statement provided to further facilitate integration. Typical used in buildings

1 Set point may be locked out /limited locally or via the network u Infrared remote control optionalTemperature either °F or °C display 2 Auto or manual heat/cool changeover. u Include a timer with the auto turning-off3 Automatic compressor short cycle protection u Auto or manual fan operation. 4 Large LCD display with enough information for quick and easy readability and operation. Such as measurement and setting temperature, fan and compressor work status, clock and timer etc. 5 Attractive turn-cover design, most frequently used keys are located on the face for quick and easy access to information. Setup keypads are located on the interior to eliminate accidental setting changes. 6 Pre-configured control sequences and rich parameters selectable to meet most applications u All setup are permanently held in non-volatile memory in the event of a power failure. 7 BACnet PIC statement provided to further facilitate integration. 8 Self configuring / adjustable baud-rate senses the communication conditions of the current MS/TP network and match them.9  A PIC statement is supplied to be easily mapped back to a graphical user interface. 10 Designed to provide exceptional temperature control of single & multistage heating and cooling equipment required to reside on BACnet MS/TP networks.11  Typical used in buildings for single zone rooftop units, split systems, heat pumps or hot/chilled water systems.

BacNet Commercial Thermostat