KSD1 E/H type bakelite thermostat
1.250v/10a or 125v/15a
2.vertical terminals
3.certificate:VDE,UL,JET,KTL,etc.
KSD1 E/H type bakelite thermostatProducts InformationKSD1 and KSD series thermostats are one type of small bimetal temperature controllers with shells. The influence of certain ambient temperature on its thermal bimetal disk would result in the deformation of the disc, and its instant movement drives the contact and other components to open or close the electric appliances and equipments. In short, it is a reliable, long-life and non-interference thermal device with fixed working temperature. The products are suitable for temperature control or overheat protection for such as hot-water heater, kettle, water dispenser, electronic disinfection device, dryer, microwave oven, electric heater, coffee machine, sandwich maker, vacuum cleaner, electric mop, toaster, soybean milk maker, electric irons and other home appliances and other electro-thermal devices and machines like electric motors and copier. Instructions Note:* Don’t let water or other liquid leak into the thermostat.* The surface has to been installed flatly and evenly on the calorific surface.* The body case should not have any crack; the shape of terminal can’t be changed at will.Technical specifications
| Electrical Rating | AC 250V Resistive load 10A; Inductive load 8A |
| AC 125V Resistive load 15A; Inductive load 12A |
| (vacuum cleaner only) AC 250V 10A FLA 40A LRA ;AC 125V 15A FLA 40A LRA |
| Operating Temperature | 0~180 °C |
| Tolerance | ±5°C,±3°C |
| Differential | 10~40 °C |
| Endurance Test | UL,CUL: (25~180°C) 100000 cycle |
| VDE: (0~180°C) 10000 cycle |
| CMJ: (150°C) 10000 cycle |
| KTL: (0~180°C) 250V/11A 10000 cycle |
| CQC: (5~180°C) 250V/10A 10000 cycle |
| Dielectric Resistance | AC50Hz 1800V for 1second |
| insulation Resistance | More than 100MΩ (DC500V megger) |
| Contact Resistance | Less than 50mΩ (DC6V/1A milliohm meter) |
| Heat Resistance | Max operating temp. 150°C,Max surface temp. 180°C |
| Max operating temp. 180°C,Max surface termp. 210°C |
| Normal Contact Status | Open / Close |
Installation requirements
| The enters of installing | 23.8mm;24mm;25.5mm;30mm |
| Installing Forms | a. Activity type; b. Fixed type;c. Pressure plate; d. Custom mode |
| Size | 4.75mm×0.5mm or 4.75mm×0.8mm or 6.35mm×0.8mm |
| Terminal type | horizontal terminal |
| vertical terminal |
| both terminals 30/40/45 deg bend upward |
| It can be custom mode to suit your need |
KSD1 E/H type bakelite thermostat
