1.CR 130 Fan Heater with integrated thermostat or hygrostat 2.Compact design 3. Double insulated 4.Certificate: CE

Fan Heater with integrated thermostat or hygrostat CR 130

-Compact design-Double insulated

 -Integrated thermostat or hygrostat

-Optional clip or screw fixing

The compact high performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures with electric / electronic components. The plastic enclosure provides double insulation and acts as protection against contact. The fan heater is available with integrated thermostat or pre-set hygrostat for temperature or humidity control. The CR 130 was designed as a stationary unit for wall fixing. For fixing on the bottom of the enclosure the fan heater CR 030 is recommended.

Technical Data

Heating element high performance cartridge Temperature safety cut-out to protect against overheating in case of fan failure. automatic reset Heater body extruded aluminium profile Axial fan, ball bearing airflow 160m3|/h, free flow service life 50,000h at 25°C (77°F) Connection 2-pole max. 2.5mm2, clamping screw with strain relief. torque 0.8Nm max. Casing plastic according to UL94 V-0, black Mounting clip for 35mm DIN rail, EN 50022 or screw fixing (M6) Fitting position horizontal Dimensions 182×160×99mm Weight approx. 1.45kg Operating* / Storage temperature -45 to +70°C (-49 to +158°F) Protection type / Protection class IP20 / Ⅱ(double insulated) Note other heating capacities from 200W up available on request

*Operating temperature of heater with integrated hygrostat: 0 to +60°C (+32 to +140°F)

Art. No. Model Operating voltage Heating capacity Setting range 13051.0-00 Fan Heater with thermostat 230VAC, 50/60Hz 950W 0 to +60°C 13051.0-02 Fan Heater with hygrostat 230VAC, 50/60Hz 950W 65% RH, factory-set 13059.9-00 Fan Heater with thermostat 120VAC, 50/60Hz 950W +32 to +140°F

*according to UL499 in combination with UL508A

CR 130 Fan Heater with integrated thermostat or hygrostat