Material: Silicon Carbide Max operating Temp.: 1500 C Aperture:10-60 PPI Porosity:80-90% Application: Iron and its alloys

SIC Ceramic Foam Filter is widely used for molten iron and its alloys filtration in ferrous foundries, and also applied as high-temperature waste-gas decontamination engineering.

We can offer various shapes,such as square, round and custom geometric shapes. Sizes from 10mm up to 600mm, and thicknesses from 10-50mm. The most common porosities are 10ppi, 20ppi, 30ppi, 40ppi, 50ppi, 60ppi. we also can be customized as per client's requirements.

1.Technical data of SiC ceramic foam filter:

Material	Silicon Carbide
Colour	Grey-black
Applied temperature	≤1500 º C
Pore Size	10-60PPI
Porosity	80-90%
Bulk Density	0.45-0.65g/cm3
Compressive Strength	≥1.0Mpa
Application	Molten Cuprum, Iron and Alloy

2.Chemical composition of SiC ceramic foam filters:

Chemical Composition	Content
SiC	≥70.00%
Al2O3	≤25.00%
Other	≤5%

3.Large size of Sillicon carbide ceramic foam filter:

Aperture	Size
	Length×Width×Thickness	Diameter×Thickness
10 PPI/20 PPI	200×200×50 mm	Ø200×50 mm
10 PPI/20 PPI	250×250×50 mm	Ø250×50 mm
10 PPI/20 PPI	300×300×50 mm	Ø300×50 mm
10 PPI/20 PPI	350×350×50 mm	Ø350×50 mm
10 PPI/20 PPI	400×400×50 mm	Ø400×50 mm
10 PPI/20 PPI	450×450×50 mm	Ø450×50 mm
10 PPI/20 PPI	500×500×50 mm	Ø500×50 mm
10 PPI/20 PPI	550×550×50 mm	Ø550×50 mm
10 PPI/20 PPI	580×580×50 mm	Ø580×50 mm

Note:we can be customized as per client's requirements.

SiC foam ceramic filter (SiC reticulated foam part)