stainless steel filter plate Material: stainless steel Layer:Multi-layer 2-6 layer Fitration rating:1 to 100 mic

stainless steel filter plate 

 

Summary

Layer usually from 2 to 6 layer. This is a standard combination of 5-layer sintered wire mesh which has the widest application. Five different layers of stainless steel wire mesh are combined, and then sintered together through vacuum sintering, compressing, and rolling, forming a porous product

Characterictics.Wide range of filter rating It has the steady filter rating from the 1micron to 100micron..Steady filter ratingDue to the two protective layers, the mesh of the filter layer is not easy to deform..High mechanical strength Owing to the support of fourth and fifth layers, it has higher resistance to pressure and mechanical strength..Easy to washIt is very easy to wash, especially to reverse wash, by virtue of adopting the surface layer filtration material.Heat resistanceIt can resist the heat up to the 480° C..Corrosion resistance It has the property of anti-corrosion as a result of adopting the material of SUS316L. .Tractability

It suits for many kinds of machining, such as cutting, bending, punching, stretching, welding and so on.

 

Material

The standard materials are SUS304(AISI304),SUS316(AISI316) ,SUS316L(AISI316L). Special Alloy Steel Hastelloy ,Monel ,Inconel are acceptable base on customer's requirement .

 

Dimension

The standard dimensions are 500x1000mm ,600x1200mm and 1000x1000mm,1200x1200mm, and other dimensions in between are also available

stainless steel perforated sheets filter mesh