RGB Touch Remote Control Bulb with RF 2.4G signal High Power
iPad iPhone iPod control!!
Instruction
Welcome to use 2.4G Touch Screen Remote Control RGB LED Bulb,please read the instruction carefully before using.
I .Product Description
It is a high-performance RGB led touch remote bulb, adopting the most advanced PWM control technology, ,owning 640 thousand colors and 20 automatical changing modes to choose.
Also, it has the memory function(that is to say, the previous settings will be resumed when power on again). It is widely used in KTV, bedroom, bar, etc.
With the technology of the 2.4G high frequency wireless remote control, it has the the characteristics of low power consumption, long distance transmission, and strong anti-interference ability ,high speed telecommunications, etc.
The remote looks fashionable and elegant , with simple and practical functions of color changing and brightness dimming, the capacitive touch screen design makes the remote easy to use .
The forging and stamping aluminum lamp body,to the maximum extent,successfully solves the heat sink trouble by air backflow with increasing more fins. Cover of led bulb is made of PC and nanometer coolant, light transmittance over85%, light transmitting evenly.
II. Technical Data
Remote | Size | 110×52×20mm |
Power | AAA×2 | |
Material | ABS | |
Fabrication processing | Multicolor printing & UV varnish | |
Bulb | Size | 120x60mm |
Working voltage | 86V~264V 50/60HZ | |
Power factor | >0.85 | |
Lamp base | E27/E26/B22 (optional) | |
Telecontrol distance | 30 meters | |
Programs | 20 kinds |
III. Function of keys
IV. Program List
Number | Mode | Brightness state | Speed state |
1 | Static white color | Adjustable | Unadjustable |
2 | White color gradual changes | Adjustable | Adjustable |
3 | All colors gradual change | Adjustable | Adjustable |
4 | Red/green/ blue three colors gradual change | Adjustable | Adjustable |
5 | Seven colors jump to change | Adjustable | Adjustable |
6 | Three colors jump to change | Adjustable | Adjustable |
7 | Red/ green jumps to change | Adjustable | Adjustable |
8 | Red/blue jumps to change | Adjustable | Adjustable |
9 | Blue/green jumps to change | Adjustable | Adjustable |
10 | White color frequently blinks | Adjustable | Adjustable |
11 | White color glitters | Adjustable | Adjustable |
12 | Red color frequently blinks | Adjustable | Adjustable |
13 | Red color glitters | Adjustable | Adjustable |
14 | Green color frequently blinks | Adjustable | Adjustable |
15 | Green color glitters | Adjustable | Adjustable |
16 | Blue color frequently blinks | Adjustable | Adjustable |
17 | Blue color glitters | Adjustable | Adjustable |
18 | Yellow color frequently blinks | Adjustable | Adjustable |
19 | Yellow color glitters | Adjustable | Adjustable |
20 | Circulation mode |
V.Programming(code clearing and code matching )
Code matching :
For a new kit ( remote& bulb), the remote can work only when it is programmed to the bulb.
Please follow the below instructions:
Confirm correctly connect between the bulb and the power.
Switch off the power, then switch on again, and press key 5 once (within 3 seconds)
the moment you see the light is on.The LED bulb blinks twice slowly when it is done.
Code clearing :
The code can be cleared as needed.
The kit (remote and bulb) will stay in the original state after code clearing.
It can work when code rematching is done.
Please follow the below instructions:
Also, Confirm correctly connect between the bulb and the power.
Switch off the power, then switch on again, and long press key 5(within 3 seconds)
the moment you see the light is on.The LED bulb blinks nice times swiftly when it is done.
Attention:
1.The regular product for sale is a kit (remote and bulb).
The user can re-programme freely as needed. One remote can control countless bulbs, but one bulb can only be controlled by four remotes (Max).
2.Please check the battery installation and bulb(totally discharge the power), when you programme after switching off and switching on.
VI. Caution
1.Please check whether the input voltage and lamp base is in accordance with the product.
2.Please don’t connect wires with power on.
Please switch on again only when it is in right connection and no short circuit.
3.Please keep your finger off the touch ring when installing the batteries, to improve its sensitivity,and use the remote ( 3 seconds later) after the batteries are installed.
Please reinstall the batteries, if the touch ring is found low-sensitivity.
4.Please do not put the bulb in the place with widely range metal area or strong electromagnetic wave nearby, otherwise,the remote distance will be seriously affected .
led Wifi light bulb AC85-265V