Welcome to ECVERY
150W led high bay light with MW power supply
150W led high bay light with MW power supply
Supplier Info
[China Supplier]
Contact Person : Mr. He Horace
Tel : 086--0755-29031432
Fax : 086--0755-61641013
Product Detail
1.Bridgelux integrated Chip 2.Taiwan Meanwell power supply 3.Good aluminum alloy heat sink 4.start up within 1-3 seconds

150W led high bay light

Product Appearance

   

Speciality

1. Adopting Bridgelux integrated Chip as light source with high lighting efficiency, high CRI, low light degradation.

2. There is build-in dedicated Taiwan Meanwell power supply, input voltage: AC100-240V,Power Efficiency:>90%,Power Factor:>0.95,constant voltage, constant current. Over voltage \ over power \ over current protection, lighting protection.

3. Good aluminum alloy heat sink with good quality heat dissipation, aluminum alloy equipment box, high strength, IP 64,small reflector cap for focusing the light, big one for gathering the light, it achieves an ideal lighting effect.

4. Can start up within 1-3 seconds, no flicker, anti-jamming, no mercury, energy saving, environment friendly

Parameter

Net weight: 45 Degree:5.92 KG / 90 Degree:5.93 KG / 120 Degree:5.99KG

Gross weight: 45 Degree:7.12 KG/ 90 Degree:7.33 KG / 120 Degree:7.39KG

Products Details

LED lamp

     

Taiwan Meanwell Power Supply

          

Diagram of degradation for Luminous

 1. The data above has been got at a temperature of 25 celsius degree and taking 1000 hours running by a nonstop way.

2. Degradation of luminous flux of LED lamps depends on environmental conditions. The higher the temperature, the longer the using time, the faster luminous flux drops.

Photomatric Data

Illumination Distance/illuminance/Irradiated Area

Packing

Lamp Packing:(L)310×(W) 250×(H) 430mm 1PC/CTN                           (L)640×(W) 520×(H) 450mm 4PCS/CTN

Reflector Packing:45 Degree (L)440×(W) 440×(H) 380mm 10PCS/CTN

                                 90/120 Degree (L)520×(W) 520×(H) 330mm 10PCS/CTN  

Using and installing instructions

As Picture No.1 Showed, Install reflector on the heat sink, wrest fixed screws very tightly

As Picture No.2 Showed, Wrest hanger into top cap, wrest lock screw very tightly

As Picture No.3 Showed, Hang the lamp on the installation site,and screw down the non skid lock .

As Picture No.4. 5 Showed, Hang chaining of steel wire on another installation device.

As Picture No.6 Showed, Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.

Attentions

1. Only professional electrician can install the lamp, please check the lamp very carefully before installation

2. Please install the lamp follow up the installation procedure, make sure the screw has been wrested very tightly, the wires have been connected properly, .Please operate according to Product Instructions enclosed.

Application

150W led high bay light with MW power supply

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.