it will take the solar energy as the main source and uses the lithium battery to store up energy

PRODUCT INFORMATION:

   Contrast to analogue automatic sensor light, PD-SLL136L is much more attractive,it will take the solarenergy as the main source and uses the lithium battery to store up energy ,also uses the PIR sensor thatintegrates digitization and saving energy .In addition, the lightweight and thin design makes it much moreconvenient to be used in some certain situation, such as field trip,camping, night repair lighting of car,power cut from earthquake or electric power circuit repair and so on .

    PD-SLL136L also is an ideal charge power supply,so it can be widely used in mobile phone,camera,MP3,MP4 . For example, we can use the lithium battery that is ready for PD-SLL136L to charge up aboveelectronic product,or use the power existing in interior directly . Of course, in daylight, we can also use thesolar battery from PD-SLL136L to charge up these products. Due to its portability,in outdoor, we will haveno any worry even if occur analogous condition. As for the design, PD-SLL136L adopt the sensor technologyfrom human movement ,the common description as follow: when switch on AUTO ,only detected the humanmovement, the light can turn on ,once the person left, it will switch off automatically. In condition of absence,the above function achieves the saving-energy and decreases some unnecessary waste . To intelligent “ON”knob, it can adjust the power of light automatically based on the person who is or isn't in the detection zone,which effectively increases the discharge time of the limited battery.

In a word, PD-SLL136L is an ideal and multifunctional intelligent PIR sensor light, in current and future days;it will become more and more important in household and traveler.  

SPECIFICATIONS

Coverage: 180º sensing angle• Detecting range: 15m (25 ºC)• LED single power: 0.06W• Matrix light: 48 super bright LEDs• Rated load: 3.5W Max.• Light-control: <10LUX• Battery: 7.4V 1800mAH lithium battery

Solar charger board: 10VDC/2.5W Monocrystalline(with 15' cable) ( Life: over 3 years )• Continuous illumination time: (1800mAH) Up to 4 hours• Time setting: Min. 10 seconds, Max. 3 minutes.• LED lamp installation height: 1-3m• Working temperature: -10 ºC to +40 ºC

Luminous flux: 125lm

36 LEDS multifunctional Solar Power Sensor Lamp