Welcome to ECVERY
LM212(ICAO Medium Intensity Light and FAA--L864)
LM212(ICAO Medium Intensity Light and FAA--L864)
Supplier Info
[China Supplier]
Contact Person : Mr. Sun Micheal
Tel : 86-21-39126868
Fax : 86-21-39126868--808
Product Detail
ICAO Medium Intensity B/FAA L864/L866/L885/Medium Intensity Obstruction Light/flashing or steady burning all available

LM212 Medium Intensity Dual Aviation Light newly development base on latest LED technology, which installation basement design as flange considering actual application. The enclosure of LM201 is made of die casting aluminum with powder coated finish, light weight, waterproof, shockproof and corrosion resistant. Self-contained wiring compartment, ease of mount.

Specifications DescriptionParameter
StandardCompliant to the ICAO(Aerodromes Annex 14) and FAA-L864
Light sourceLED
LED colorAviation red
Operating voltageAC220V/DC48V/DC24V (can be customized)
Power consumption30W(Steady)
Flashing rate30 times/min(default), other flashing rate available
Flashing duration150±20ms
Working modeBottom light working,top light is spare
Led power consumption≥45W
On/off level50Lux
Vertical degree3°Min
Horizontal degree360°
Operating temperature-40°C ~ +70°C
IP ProtectionIP65
Relative humidity10% ~ 95% (no condensing)
MaterialBase:Die casting aluminum,  housing: PC   Reflector: ABS   with vacuum coating
Functions & FeaturesBased on LED technology and meets optics standardBuilt in LED protective circuit, stability and cost savingsResistant to Shock and VibrationsCorrosion Resistant Lamp& HousingCombustibility rating: UL94-V0.When and if the bottom LEDs fails, it will switch on the top LED automatically, and give an alarmInstallation and operationInstall the light on a smooth surface, with enough mechanical strength; if there is no installation surface, we can customize the mounting bracket as requested.When install the light, do not install the photocell towards the light beam around, and also ensure the photocell is not covered by something.Verify whether the supply voltage complied with the rated voltage of the lightOpen the nameplate cover, connect power cable and earth wire to corresponding terminals and then remount the cover.Power on after verification of connection, the service light will light upNoticeTemperature rise inside the control box is normal phenomenonThis product is a sealed structure; Should not be tampered with by anyone other than registered installerPlease do not open any components inside by yourselfProduct FileModel:  LM212On Stream Date:  Mar. , 2010Applications:  High building, tower, crane, high chimney, lighthouse, high voltage cable tower, oil well, etc.Standard:  MH-T 6012-1999; ICAO Annex 14; FAA-L864Certificate: CE certification

Order details:

ModelVoltageWork ModelPhotocellOthers
LM212AC or DCFlashingWith photocell or not 

Please advise us  your  favor details of the product,we will offer for you ASAP

LM212(ICAO Medium Intensity Light and FAA--L864)

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.