Ads by Google
Waterproof Power Adapter
SUNSHINE Waterproof transformer adopt top-grade aluminum alloy as shell material, adelomorphic heat dispassion design, exquisite and fashionable, we give full consideration on perfectcombination by efficiency and appearance, All-wave heat dispassion helps our products work in a low temperature within 26 centigrade degree.
Adopt PWM technical design, ensure products with excellent performance, complete protection, Enable the customer relived to use it .
Choose up-market electronic component, make products with real high quality from inside to outside .
Product power efficiency >85%, all passed EMC and LVC test, CE and Rohs approval, lower power consumption, better environment protection.
Omni bearing waterproof design, IP67
Detailed product Description
1. Available 200W, 150W, 100W, 60W, 50W, 40W, 30W
2. Voltage: 12V /24V
SPECIFICATION | ||||||
MODEL |
12V150W |
24V150W |
|
|
| |
OUTPUT | DC VOLTAGE | 12V | 24V |
|
|
|
RATED CURRENT | 12.5A | 6.25A |
|
|
| |
CURRENT RANGE | 0~12.5A | 0~6.25A |
|
|
| |
RATED POWER | 150W | 150W |
|
|
| |
NOTE.2 RIPPLE & NOISE (max.) | 150mV | 150mV |
|
|
| |
NOTE.3 VOLTAGE TOLERANCE | ±4% | ±2% |
|
|
| |
SETUP, RISE TIME | 80ms/220VAC | |||||
HOLD UP TIME (Typ.) | 60ms/220VAC | |||||
INPUT | VOLTAGE RANGE | 170 ~ 250VAC | ||||
FREQUENCY RANGE | 50 ~ 60Hz | |||||
POWER FACTOR (Typ.) | PF>0.6/220VAC | |||||
EFFICIENCY (Typ.) | 80% | 82% |
|
|
| |
AC CURRENT (Typ.) | 1.42A/220VAC | |||||
INRUSH CURRENT (Typ.) | COLD START 50A/220VAC | |||||
PROTECTION | Short circuit | Protection type : recovers automatically after fault condition is removed | ||||
Overload | overload protected @ 145-160% above peak rating | |||||
Over temperature | Protection type : Shut down o/p voltage, re-power on to recover | |||||
ENVIRONMENT | WORKING TEMP. | -30 ~ +50°C (Refer to output load derating curve) | ||||
WORKING HUMIDITY | 20 ~ 99% RH non-condensing(Waterproof) | |||||
STORAGE TEMP., HUMID IT Y | -40 ~ +80°C , 10 ~ 99% RH | |||||
SAFETY & EMC | SAFETY STANDARDS | CE Mark (LVD) , IP67 | ||||
WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC I/P-GND:1.5KVAC | |||||
EMC Test Standards |
EN55015:2006 ; EN61547:1995+A1:2000 ; EN61000-3-2:2006 ; EN61000-3-3:1995+A2:2005 ; EN61347-1:2001 ; EN61347-2-13:2006 | |||||
NOTE |
1. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 1 0 uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation. | |||||
Waterproof Power Adapter