24V or 12V Magic RGB Controller and Dimmer,fit for LED Strip Light,LED Down Light,LED Panel Light etc

Thanks for using led controller SL-RGBW-DC24V manufactured by Sun Lighting.One package includes one controller,one remote control(without battery) one core-end terminal,one usage instruction.Please contact your supplier if any problems occur before you use.

 Brief introduction

SL-RGBW-DC24V is a multi-function Touching RGB LED and W adjustable Controller. It adopts the most advanced PWM remote control technology ,can control all the full color LED lighting with four lines three circuits(common anode) and dimmer white brightness,with more than 640000 combination colors and 15 auto light changing modes.it widely applies to RGB LED strip light,LED Module,LED Panel light etc

Technical Parameters(remote control):

1,Power supply AAA battery * 3pcs

2.Cover Material ABS

3.Fabrication processing multicolour printing & UV varnish

Technical Parameters(controller)

1. Working voltage:DC12V/24V

 2. Output control 3 circuits(R/G/B) and White circuit

3. Control current 6A/circuit

4. Connecting mathod common anode

5.Wireless frequency 433.92MHz

6. Receiving range:20meters

 Functions of Keys

1. Key 1.on/off

2. Key 2.rgb light changing mode(15 modes)

3. Key 3 color light/white light switching mode

4. Key 4 turn up(brightness/speed)

5. Key 5 turn down(brightness/speed)

 How to use

1. Press Key 1 to turn on/off in any state.

2. Press Key 2 to activate light changing mode, a new mode each press,15 modes in total.

3. Press Key 3 once to activate white light mode, changing brightness by pressing Key 4/Key 5 or changing light color by touching the color ring.

4. Resume fuction. The previous settings will be resumed while power on again

1	Auto color changing	8 grades of brightness to adjust by pressing Key 4 or Key 5.
2	seven colors jumps to gradual change	8 grades of speed to adjust by pressing Key 4 or Key 5	3	white color jumps to gradual change	8 grades of brightness to adjust by pressing Key 4 or Key 5.
3	Seven colors jumps to change by Touching color ring	8 grades of speed to adjust by touching color ring

Matching code

Press Key 4 once within 3 seconds when power on again,.the light will blink 3 times if matching is successful.Clearing Code Press Key 4 five times within 3 seconds when power on again.the light will blink 6 times if clearing is successful.

Caution

Please do not touch or press the color ring while loading the battaries to ptrotec the  sensitiveness. Please use the remote controller 3 seconds after the battaries are loaded.Please reload the battaries when you find the color ring is not sensitive.

 After-sales service

we claim to offer free maintenance or change new product if any problems occur within one year.

The buyer should pay for the maintenance due to unfollowing the instructions even within one year. The maximum duty of our company is to change the product with the same item No. and quantity if any damage occur. 

1. Incorrect operation mainly due to unfollowing instructions.

2.Damage caused by uploading, fixing,changing circuit ,connecting or changing the chips unprofessionally.

3.Damage caused by shipping,shaking,dropping or water inflowing after buying.

4. Damage caused by natural disasters suchas,earthquake,fire,flood,thundering,environmental pollution or abnormal voltage.

5.Damage caused by high temperature,moisture,hazardous chemicals or inappropriate maintenance.6.Our products have been updated newly.

Magic RGB and White Controllers