Ads by Google
2 Ports European Plug Wireless Remote Control Power Socket
1. The Remote Control uses a 3volt CR2032 lithium battery.
2. To replace, Slide off the battery cover on the back, remove exhausted or dead batteries from the remote control, and insert a new CR2032 lithium battery, making sure to match up the +and –polarity markings.
3. To test, press “ON” or “OFF” buttons of remote control to make sure the indicating LED of remote control lights up. Slide the cover back.
4. DO not mix old batteries and new batteries or standard (carbon-zinc) with alkaline batteries.
5. Remove batteries if product is not to be used for a long time.
6. Do not dispose of batteries in fire in case batteries may explode.
Specification:
| 1 | Rated Voltage: | 220VAC/50Hz |
| 2 | Load Power: | 1200-2000W |
| 3 | Rated Current: | 8-10A |
| 4 | Operating Temperature: | -25~40°C |
| 5 | Standby Power Consumption: | 50VAC |
| 6 | Operating Frequency: | 315-433MHZ |
| 7 | Remote Control Distance: | 5-30M |
Operation Instructions
1. Pulg the power input end of remote socket into a grounded 3-prong outlet, Be sure the outlet is GFCI approved. Double confirm that connection is reliable.
2. The indicating LED of remote socket will be lighting up after successful connection, pls check connection again if not.
3. Pulg your appliances into the outlets of Socket Base . Be sure that your appliances are powered ON.
4. Press “ ON” and “ OFF” buttons of remote control to activate the remote socket.
Products Remarks
1. NT-AKMW466 has been tested and found to comply with the limits for a CLASS B digital device, pursuant to CE and Rohs Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
2. There is no guarantee that harmful interference will not occur in a particular installation like too close to radio or television especially to those operating motors inside some equipments.
3. It is also not encouraged to install 2 sets power sockets of this product within 15 meters, otherwise it may cause harmful interferences to each other when they are used in the same time.
4. Changes or modifications have to be handled by qualified people.
5. Keep it away from children.
2 Ports 220V Intelligent Wireless Remote Control Power Socket