Ads by Google
Hard metal/tungsten carbide blocks for processing blades, wear parts
Properties and applications of carbide for plates | ||||||||||
Grade | Performance & application recommended | Approx Grades in China | ||||||||
Density | T.R.S | Hardness | ||||||||
g/cm3 | MPα | HRA | ||||||||
MK6A | 14.9 | 1850 | 92.0 | ine grade alloy, with good wear resistance, used for processing blades,wear resistance parts etc. | ||||||
MK8 | 14.7 | 2400 | 89.5 | High bending strength, wear resistance lower than MK6A, used for processing blades,wear resistance parts etc. | ||||||
MK15 | 14.5 | 2500 | 87.5 | Used for punch dies,stamping dies and wear resistance parts. | YG15 | |||||
MG20 | 13.5 | 2800 | 85.5 | High bending strength,used for step dies and other stampings dies. | YG20 | |||||
Other grade of boards may be offered according to customers' requirement. | ||||||||||
Carbide board | ||||||||||
unitmm | ||||||||||
200 | 200 | 15-45 | ||||||||
150 | 150 | 15-45 | ||||||||
150 | 100 | 15-45 | ||||||||
150 | 130 | 15-45 | ||||||||
150 | 80 | 15-45 | ||||||||
120 | 120 | 15-45 | ||||||||
100 | 100 | 15-50 | ||||||||
100 | 50 | 15-50 | ||||||||
100 | 45 | 15-50 | ||||||||
80 | 55 | 10-50 | ||||||||
80 | 40 | 10-50 | ||||||||
70 | 35 | 5-50 | ||||||||
45 | 25 | 3-20 | ||||||||
35 | 19 | 5-30 | ||||||||
20 | 20 | 5-20 | ||||||||
18 | 13 | 5-20 | ||||||||
Other types of boards may be offered according to customers' requirement. |
carbide block (unground) for making mould