dividing head The simple indexing spacer is designed for using and indexing in both horizontal and vertical position.

INdexing  spacer 

The simple indexing spacer is designed for using and indexing in both horizontal and vertical position.It is the most optimum in use for milling machines, grinding machines,drilling machines,and planer etc.The divisions in 2,3,4,6,12,24 are permitted any desired angular indexing can be performed too by using a graduated ring on the spindle and a verner.1. The center through hole is big to be suitable for the large and long work piece.2. Hardened and ground 24 position master plate, can index the special angle of 15 with excellent accuracy. 3. CC-Type can be used with 2 pcs type 3-Jaw Chuck. Especially, it does similar work. as rotary table when it match with face plate. 4. Rapid indexing and easy operation. It’s sharp equipment for mass-production. 5. Super Spacer index include 3 jaw chuck, Face plate dia. 10, 250mm Masking Plates 2,3,4,6,8,12. 6. Simple index include 3-jaw chuck, Masking Plates 2,3,4,6,8,12 7. Used the key guide block, the center can be corrected quickly and accurately.

specification	cc-8	cc-6
Center height mm	149.25	130
Center diameter of the spindle mm	Φ119.774	Φ80
divisions	2,3,4,6,8,12,24	2,3,4,6,8,12,24
Height between external centering diameter of the spindle to the base(in vertical position)mm	96	89.5
Locating diameter of the spindle mm	Φ212	Φ170
Width of the locating key mm	16	16
Matched churk	K31210A	K31167
24 divisions individual error	25"	25"
Net weight kg	52	33
Gross weight kg	60	39
Case dimensions mm	405×370×345	372×340×304

  

CC-8 Dividing Head