1.give you a longer tool life 2.greater performance 3.increase your productivity.

 

     Whether you need standard or special shapes, thick or thin turret, Amada or Strippit style. Our products features designed to improve your piece part quality maximize productivity and enhance a longer tool life and greater performance.

Punch Press Tooling
Material  001	Cr12Mov = SKD11
Heat treatment	HRC 60°-  62°
Material 002	W6Mo5Cr4v2 = M2 = SKH51
Heat treatment	HRC 61°-  63°
Package	Plastic Package & Wooden Crate
Delivery time	3 - 5  workdays

Advantages:

Small distortion of material;High endurance surface, longer tool life;Nice interchangeability;Smooth molding, Fast adjustabilityCompetitive Price, Fast Delivery.ISO-9001:2000 certificate

Remark:

(1) Material 001: Cr12Mov = SKD11

The Chemical Composition of Cr12Mov

C	Si	Mn	Cr	Mo	P	S	V
1.45~1.70	≤0.40	≤0.35	11.0~12.50	0.40~0.60	≤0.030	≤0.030	0.15~0.30

HRC60°-62°

Thickness can be processed: Hot-Rolled Steel & cold rolled steel (3 - 6 mm)

(2) Material 002: W6Mo5Cr4v2 = M2 = SKH51

The Chemical Composition of W6Mo5Cr4v2

C	Mn	Si	Cr	V	W	Mo	P	S
0.8~0.9	0.15~0.4	0.2~0.45	3.8~4.4	1.75~2.2	5.5~6.75	4.5~5.5	≤ 0.03	≤ 0.03

HRC61°- 63°

Notices:

(1)     The height of molding is higher; the phenomenon of “reverse pulling” is more serious.

(2)     For panels that are smaller than 1.2, the Rc should be over 10mm so as to pretend the angle from spiltting.

(3)     The interval space(A)for non-molding should not be less than 3 times of the panel thickness.

Molding mould advantages:

1. Small distortion of material;

2. Nice Interchangeability;

3. Smooth molding;

4. Fast adjustability

punching tools punch and die set