Welcome to ECVERY
Wood laser cutting machine
Wood laser cutting machine
Supplier Info
[China Supplier]
Contact Person : Ms. Gao Julia
Tel : 86-757-89919766
Fax : 86-757-89919700
Product Detail
*Smooth cutting wood *High precision *Different from others and Advanced software *Not only cut,also engrave at the same time

Only one factory for  3 Years Warranty


Free Payment, No Express Charge in after-sale service except consumable parts 

Wood Laser Cutting Machine

Brief Introduction:

This model Laser Cutting Engraving Machine are equipped with up & down platform and rotary device which helps to process on cylinder object efficiently.

Applicable Materials & Industries:

Applicable Materials: Acrylic/ Plexiglas/ bamboo/ MDF/ wood/ paper / leather/ fabric etc.


Applicable Industries: Bamboo & wood product/ art craft work/ ornament/ crystal/ mold/ decoration/upholster and other related industries.



1) Rotary attachment and up and down table engrave the thick and round materials on the surface.

2) Original Singapore imported lens with molybdenum base makes the equipment produce smaller facular and stronger cutting force, greatly improving working efficiency and reducing cost.

3) The software can start to work from the point where it stops in case of a sudden loss of power.

4) Long and strictly tested main parts ensure stability and long life of the machines.

5) This machine uses USB port to transmit data, equipped with large-capacity internal memory, improving working speed and efficiency greatly.

6) CorelDraw/ AutoCAD output directly.

Technical Parameter:



Processing Area(mm)


Ascending & Descending Distance


Max. Cutting Speed


Max. Engraving Speed


Laser Power:

60W/ 80W/ 100W/ 135W

Resolution Ratio


Min. Shaping Character

Chinese Character: 2x2mm, letter: 1x1mm

Location precision


Power supply

AC 220V±10%, 50Hz

Gross Power




Packing Dimension(mm)


QC Process:

1. 300 Days Warranty, Yet strict incoming tube test.

2. Only circle laser beam is qualified. 

3. Power Meter shows the min. & max. tube power . Average power will be choosen for assembling into machine while the unqualified send back to supplier.

4. Main Parts like Power Supply Box, Motor, Motor Driver, Main Board will be tested under 52 degree high temperature. There is no problem even you use in desert area.




5. All Parts test strictly, pay special attention to the white device. It's Autocollimator. With such a high-tech device, it's easier to test the balance for rail while most of small factories adjust it only by technician's familiarity. 

 6. After being assembled, we will test machine by 2mm circles. If there is any machine with wrong size or is not round, it's not allowd to be delivered. 

New Order: 



Water-proof Plastic Film With Foam Protection in Each Corner

 Solid Seaworhty Wooden Case, Load Container as much as possible



First, what’s it used for?

This model Laser Engraving Machine as equips with Rotary Attachment and Lifting Table, it’s mainly used for large thickness and cylinder object processing. That’s also the main different between HS-S and HS-T Laser Machines.

Second, what’s the descending distance?

26CM can be lifted usually. Special requirement is posible.

Third, does the cylindrical move out of rotary device?

We have special rotary device to hold on the cylindrical tightly.

Fourth, can I use for cutting?

Same as other series, this machine can both engrave and cut depends on the platform you choose: Honeycomb platform is better for engraving while Knife Strip table, in contrast, good at cutting.

Fifth, how about warranty?

3 Years Warranty for machine except the consumable parts Laser Tube, Focus Lens and Reflective Mirror which is different from manufacturer. We are the first company who has such promise to guarantee our high quality.

Sixth, do I have to buy the consumable in advance? How can I change spare parts? Is it difficult?

In our view, laser tube is easy to be damaged if you ask to send independently. Therefore, we suggest you to buy an extra one for stand by. And it’s very easy to change all spare parts. Because we will provide you with Detailed English Manual, Teaching Video together with machine.

Seventh, what will I receive with machine?

1) Laser Engraving software(English Version)2) User Manual (CD)3) Industry water cooling system4) Air exhaust fan5) Air Pump6) Communication cable7) 3 Reflect optics (installed in the machine)8) 1 Focus optics (installed in the machine)9) 1 Laser tube10) Other tools

Eighth, what’s our payment term?

T/T (Telegraphic Transfer) is preferred. L/C is acceptable which is up to quantity.

Ninth, how long does it take for you to get your machine?

It depends on where you are, of course. What we can promise is the production time. We usually have this laser machine in stock. Even though we don’t have in peak season, it takes 5 days at most for production as it’s our common model.

Get Your Hand; Move your Mouse, Ready? Go: www.fsbeyondlaser.com



Feel Free to call Jack for free suggestions about Laser Machines:  



Or send me mail to get extra consumable parts like Laser Tube, Focus Lens or Reflective Mirror.

Only one factory for  3 Years Warranty



Free Payment, No Express Charge in after-sale service except consumable parts

Wood laser cutting machine

Related Products
Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.