Welcome to ECVERY
5-Axis Waterjet Cutting Head
5-Axis Waterjet Cutting Head
Supplier Info
[China Supplier]
Contact Person : Mr. gu xiaojie
Tel : 86-574-65801988
Fax : 86-574-65802988
Product Detail
For high precise no taper cutting, cone-shaped,circular arc, rotating curved surface,tilting cutting , the five-axis is a must.

Difference of water jet cutting between the conventional water jet and the ZHONGBO tilt jet cutting head can be observed clearly:

The bottom of the part: using ZHONGBO tilt cutting head.   

   The bottom of the part: without using ZHONGBO tilt cutting head.

 For the conventional water jet cutting, secondary processing is necessary as the conventional water jet leaves obvious stream lag and taper during cutting on the bottom of a part. The ZHONGBO tilt cutting head provides a high quality cut part, which can be directly used , thereby saving valuable time and money.  

   

Cutting a part with high speed by using the ZHONGBO tilt cutting head can obviously observe no stream lag and taper.    

Cutting a part with high speed without using the ZHONGBO tilt cutting head can distinctly observe stream lag and taper.     

ZHONGBO tilt cutting head The ZHONGBO tilt cutting head with tolerance control can produce high-precision parts, and can cut faster remarkably than the conventional water jets The system in patent application utilizes a newly-developed advanced motioning system which has unique precision operation cutting mode to control a set of fine motioning joints mounted on the jet cutting head so as to control the universal tilt motion of the water jet cutting head. The joint allows the jet cutting head to tilt to any directions so as to compensate taper and stream lag that the conventional water jet has during cutting. Water stream lag and tap are natural phenomena that each user wants to eliminate, but faster water jet cutting results in larger stream lag which causes the geometrical deformation of a part cut, and faster cutting speed results in bigger taper. The conventional water jet has the limitation of slowing down the speed to reduce or eliminate the tolerance of a workpiece caused by stream lag and taper, which are avoided by the ZHONGBO tilt cutting head.   

 ZHONGBO tilt cutting head  

ZHONGBO tilt cutting head (patented) can position the jet cutting head at a certain angle for cutting, and can precisely counteract the error of natural taper generated during water jet cutting.The taper does not disappear, it just moves to the scrap side (which causes the section of the scrap side to turn into double tilt), leaving you a part you require with a vertical cut (obtaining a cut of almost zero taper). And this is especially suitable for cutting thicker material. What is it that the ZHONGBO tilt cutting head can make but the conventional water-jet cutting head can’t?  

Typical features

Automatically reducing the taper without additional programming and correction (with common two-dimensional programming software, such as CAD, Corel Draw, etc. can make it.); Counteracting taper, with the maximal taper of ±10°; Being used for tilt cutting of ±10° below; Having the automatic vertical function, this ensures that the jet cutting head can return to the position totally vertical to the workpiece for cutting. Drive controlled by five-axis servo system.

5-Axis Waterjet Cutting Head

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.