Isostatic press is widely applied to Ceramics,Hard metals.Powder metallurgy,Graphite,PTFE.

Provide unilateral pressure to all directions to products that need to be formed by using fluid (water or oil).

With control of pressurization and decompression which results in products of uniform density; reducing internal stresses, cracks, strains and laminations.

Characters:

More SecurityHigh-pressure chamber, rack, yoke frame made by 65Mn steel wire winding structure, all the high pressure components include the internal structural, Insure absolute safe protection.

High Reliability

Our CIP divide the work media and dynamic media by piston so as to availably prevent work media enter into pressurization system, also use filt

er, could filter out the impurities within the working medium, provide a clear working environment.

Convenient Operation

PLC control system, with operator interface, could display accurate and detailed data. Pressure Boost speed, dwell time, pressure value, pressure unloading speed are adjustable, also can save print all your operation date for reference.

Low Maintenancewe use the combination of sealing technology, seal replacement is very simple, without professional completion of 15 minutes to replace.

Applications:

Cemented carbides, rolls, wear parts

Refractory, nozzles, stoppers, blocks, crucibles.

Isotropic graphite, tools, electrical and high-temperature

Ceramics, electrical insulators, tubes for chemical applications, special ceramics, and ferrite.

Metals, filters, preforms, refractory metals.

Plastic, tubes, rods.

Specifications:

Max. Useful Diameter Of Pressure Chamber	1000 mm
Max. Useful Depth Of Pressure Chamber	2000 mm
Max. Operating Pressure	400 MPa
Work Medium	Antirust Water And Oil
Manner Of Increasing Pressure	Continuous Or Once
Max Time Of Increasing Pressure	15 min
Time Of Keeping Pressure	From 0 To 999 Sec (adjustable)
Pressure Loss Rate Within 5 Minutes	Below 3 %
Unloading Rate	Continuous (adjustable)
Hydraulic System Rating Pressure	30 Mp
Temperature	Room Temperature - 60°C
Total Power	7.5KW+5.5KW

 

Warm Isostatic Press