Ads by Google
Precision mill cutter grinder(LY-66)
1.This sharpner can grind relief ,cutting edge of miller ,drill,remear ,also can grind ball end mill and tap guide cutting edge just change attachment.
2.This main part of sharpener is made of excellent Aluminum ,it takes up advanced international technique of air floating .3. Applicate to 2,3,4,6 flutes HSS end mill ,Carbide end mill.
Specification:
Model | MS-66 |
Capacity(shank dia*blade dia*length) | 50mm*175mm*200mm |
Table cross travel (x axis) | 115mm |
Table longitudinal travel(y axis) | 60mm |
Table in-feed graduation | 0.02mm |
Adjustment for wheel head | +35°-5° |
Air bearing swivel | 360° |
Dia of grinding wheel | 125*52*32mm |
Air consumption | >=0.63Mp |
Motor | 380V/0.55KW/50Hz/2800rpm |
Optional attachment | |
air bearing grinding attachment | |
Radius grinding attachment | |
5C collet | |
diamond/resin grinding wheel |
air bearing grinding attachment specifications:
Max. Stroke of air bearing sleeve | 9" |
Collect for work table | 5 |
T-shaped slot width for table | 12.7mm |
Air consumption | >0.63Mpa |
Tracheal joints | 1/4" |
Turning angle | 360degree |
Parallelism of workhole center line to abse surface | 0.001/100 |
Radius run out of workhole center line(60mm for hole) | 0.015mm |
Radius grinding attachment specifications:
Install T-shaped slot width | 12.7mm |
Spring chuck | 5C |
The minimum feed unit | 0.0005” |
Maximum griding arc radius | 3” |
Equal dividing | 30degree |
Parallelish of work hole to base | 0.02/60mm |
Radial run out of work hole center line(60mm for hole | 0.015mm |
picture of Radius grinding attachment and air bearing grinding attachment:
Producing line:
Precision mill cutter grinder(LY-66)