Welcome to ECVERY
Plant Transfusion Pipe Perforating Machine
Plant Transfusion Pipe Perforating Machine
Supplier Info
[China Supplier]
Contact Person : Ms. Li Shirlin
Tel : 0086-577-65671998
Fax : 0086-577-65672998
Product Detail
1.plant pipe driller machine,Drilling holes in plant pipe 2. pipe diller machine with servo motor

KT-250 Plant Transfusion Pipe Perforating Machine

USE

1,Let the double holes of the liquid hose face upward, and squeeze them with water pumps. The place where water is absorbed should be filtered with gauze in order to avoid blocking. In case of blockage, just loosen the end part and wash it with clean water.

2,Place the pump in the liquid, connect it with the conduit and the hose(three-way or four-way). And then connect with the mains.

CHARACTERISTICS

1,Less manpower and less investment. By connecting the water source and the farmland with pumps, It employs the liquid hose to replace the traditional irrigation by manpower, thus greatly reducing the burden of the farmers.

2,Less fertilizer and higher yield. By irrigating and applying fertilizer with this produst, such as soluble fertilizer like Ammonium Bicarbonate and compound fertilizer, the fertilizer consumption can be reduced by 50%, while at the same time the output of the farm product per unit area increased by 20%.

3,Energy saving without pollution. By covering this product with a layer of mulch film, the temperature necessary for the growth of crops can be guaranteed (especially in winter) and the irrigation concentrated. Thus the water consumption can be reduced by 80% .In this way, such crops as fruits and vegetables will use less electricity without directly touching the fertilizer, so that the purity is improved.

4,Heighten ground temperature and reduce insect pests.

Range of application

This product can be widely used in many kinds of crops, such as cotton, vegetables, flowers and fruits; strawberries, oranges, grapes, watermelons, etc.

Main Technical Parameters

Model

KT-250

Drilling interval

10-85mm

Drilling diameter

0.6-1.0mm

Drilling speed

30-100pc/min

Weight

150kg

Overall dimension

1600×50×1900mm

Welcome to visit our website: www.wenzhoukt.com for checking more drip irrigation pipe blowing machine.

Plant Transfusion Pipe Perforating Machine

Related Products
Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.