Functions
1.Based on the 2T terminal crimping machine, it adopts cassette mould which is easily changed.
2. It's controlled by micro-computer CMOS chip, with humanity program-design, which is more safe and reliable.
3.By replacing expensive reel terminals, the loosing terminals are more economy.
4.It adopts centrifugal libration feeding, frequency conversion speeding adjusting, cylinder precision location, and unite connecting standard.
5.Compared with the reel terminals, the running speed of the loose terminals can be the same, and the later should be more labor-saving and economy, also the cost performance takes more advantages.
6.It adopts the special moving wheels, which make the moving more convenient.
7.If it needs, it can be used as 2T crimping machine, allocated with 800, or 2000 type, side-feed and rear-feed mould.
Model | HS-D2T |
Outline dimension | 450*800*1200mm |
Power | AC 220V/50Hz |
Weight | Approximately 160KG |
Consumed power | Motor:250W |
Working lamp: 60W | |
Libration plate: 120W | |
Crimping capacity | 20Kn |
Stroke of the slide block | 30mm |
Crimping times | 120PCS per minute |
Closing height | 126mm |
Adjust as closing height | 10mm |
HS-D2T Automatic Loose Terminal Crimping Machine