oxyhydrogen flame ampoules sealing machine just uses water and electricity, no gas bottle, no hydrogen gas storage, no leakage.

1.Technology overview of Oxy-hydrogen Flame Ampoule Sealing Machine

      Traditional ampoule sealing machine adopts liquid gas as fuel and air as combustion-supporting gas.The flame produced by it contains carbon dioxide, carbon monoxide and nitrogen compounds,these substances will impact on the quality of pharmaceuticals and bring security hidden danger to working environment.

      Okay Energy Equipment Co.,Ltd adopts oxy-hydrogen generetor to seal the ampoules as scientific research personnel required, and we have succeeded.

      Oxy-hydrogen Flame Ampoule Sealing Machine technology adopts water as the medium to electrolyze water into H2 and O2, fire them to form oxy-hydrogen flame. The temperature of Oxy-hydrogen flame is as high as 2800 degrees so that it can seal the ampoule very fast. The quality and speed of Oxy-hydrogen Flame sealing method is higher than Liquid gas’s.

 

 

2.Comparison of Technology overview between Oxy-hydrogen Flame Ampoule Sealing Machine and Traditional Liquid Gas Ampoule Sealing Machine

1) Safety

 Oxy-hydrogen Flame Ampoule Sealing Machine just uses water and electricity, no gas bottle, no hydrogen gas storage, no leakage and explosive danger.

2)Convenience

it can work just with water and electricity, every litre water can be used for 7~8 hours. On the contrary, liquid gas bottle needs to be moved by man to change it, so it is very inconvenient.

3) Cleanliness

Oxy-hydrogen combustion just produces little water vapour, so there is no harm to the pharmaceuticals. But liquid gas combustion produces carbon dioxide, carbon monoxide and nitrogen compounds which will impact on the quality of pharmaceuticals.

4) High Efficiency

The speed of Oxy-hydrogen Flame sealing method is higher than Liquid gas’s.

 

3. Composition of Oxy-hydrogen Flame Ampoules Sealing Machine

 

Oxy-hydrogen Flame Ampoule Sealing Machine: 1 set

Flame Torch: 1 suit

Holder: 1 piece

 

 

4. Operation of Oxy-hydrogen Flame Ampoules Sealing Machine

 

1) To install the Oxy-hydrogen Generetor according to the operating instruction, then connect the pipeline as the above picture, adjust position up and down and start to work.

2) To open the Power Supply switch of Oxy-hydrogen Generetor, start to produce gas, when the air pressure rises to 0.1Mpa, you can open the torch valves to transport gas.

3) To use Lighter ignition to formed Oxy-hydrogen Flame, can adjust flame size further through valves adjustment.

Remark: When firing, pls don’t let any part of the body be in front of the torch mouth. When lighter firing, the body should be in the side of the torch to avoid firing your hands.     

   

 

4) To use the tweezer to nip ampoule, the tautness of nipping should guarantee the ampoule not only won’t come off, but also can rotate it with hand.

 

 

5)To put the ampoule nippedby tweezer in Oxy-hydrogen Flame to heat and rotat it at the same time. When heating finished, pull up the tweezer, the process of sealing will beaccomplished immediately. 

 

5. The Model No. of Okay Energy Oxy-hydrogen Flame Ampoule Sealing Machine

 

1)AS-200: Suitable for 1~10ml Ampoules, and 1~5ml is the best.

2) AS-300: Suitable for 1~20ml Ampoules.

Okay Oxy-hydrogen Flame Ampoule Sealing Machine serves our customer by our perfect after-sales service system, meticulous Ampoules Sealing Machine training, rich Ampoules Sealing Machine video teaching data. Oxy-hydrogen Flame Ampoule Sealing Machine has won a good reputation from domestic and overseas customers because of its excellent performance.

Oxyhydrogen Flame Ampoule Sealing Machine