HLQ 35 m3 Asphalt Storage Tank
Our asphalt storage tank is suitable for storing asphalt, emulsified asphalt, modified asphalt, PMB solution and heavy fuel. The design standard are GB/T 16563-1996 and ISO1496-3:1995. The working pressure is 0.09Mpa and the working temperature is 250°C.
If you have more requirements, please contact with me. Trade manager: Zenger Zeng
MOB: 0086-13707175765 / TEL: 0086-27-86619223 / FAX: 0086-27-86709802
Mainly parameter of the asphalt storage tank is as below:
No. | Item | Specification | Remark |
1 | Exterior | Cylinder | Horizontal |
2 | Maximum Capacity (m3) | 35 | 10~100 CBM |
3 | Dimension (mm) | Ø2400*7800*2818 | Ø*L*H |
4 | Curb Weight (kg) | 5000 | |
5 | Payload (kg) | 30000 | Water load at 20°C |
6 | Working Temperature (°C) | 250 | |
7 | Working Pressure (Mpa) | 0.09 | |
8 | Tank Materials | GBQ345B | Carbon steel |
9 | Thickness (mm) | 6 | |
10 | End Enclosure (mm) | 6 | Flanged flat head |
11 | Stiffener (mm) | 4 | 4 pcs |
12 | Saddle | A2000-S | 2 pcs |
13 | Heating Pipe (mm) | Ø57*3.5 | L=132000 |
14 | Manhole (mm) | DN500 | With overhead nitrogen blanketing valve DN25 |
15 | Asphalt Filling Hole (mm) | DN250 | |
16 | Sheet Gasket | PTFE | |
17 | Anti-leaking Breather Valve (mm) | DN60 | 2 pcs |
18 | Asphalt Protective Frame (mm) | 800*750*150 | With asphalt flooding pipe DN50 |
19 | Thermometer (°C) | 0~300 | |
20 | Volume meter | Ball floating type | |
21 | Reserve Feeding Flange Hole (mm) | DN100 | 2 pcs |
22 | Flange Hole of Asphalt Discharge Hole (mm) | DN100 | |
23 | Asphalt Detecting Value (mm) | DN25 | |
24 | Flange Hole of Heating Pipe (mm) | DN50 | 2 pcs |
25 | Insulated Layer (mm) | 100 | Fiberglass wool |
26 | Exterior Paneling(mm) | 0.6 | Sandwich steel plate plus stainless baling strip with waterproof sealing |
27 | Guardrail of Ladder (mm) | W=400 |
35 m3 Asphalt Storage Tank