Ads by Google
HLQ 35 m3 Bitumen Storage Tank
Our bitumen storage tank is suitable for storing asphalt, emulsified asphalt, modified asphalt, PMB solution and heavy fuel. The design standard are GB/T 16563-1996 and ISO1496-3:1995. The working pressure is 0.09Mpa and the working temperature is 250°C.
If you have more requirements, please contact with me. Trade manager: Zenger Zeng
MOB: 0086-13707175765 / TEL: 0086-27-86619223 / FAX: 0086-27-86709802
Mainly parameter of the bitumen storage tank is as below:
No. | Item | Specification | Remark |
1 | Exterior | Cylinder | Horizontal |
2 | Maximum Capacity (m3) | 35 | |
3 | Dimension (mm) | Ø2400*7800*2818 | Ø*L*H |
4 | Curb Weight (kg) | 5000 | |
5 | Payload (kg) | 30000 | Water load at 20°C |
6 | Working Temperature (°C) | 250 | |
7 | Working Pressure (Mpa) | 0.09 | |
8 | Tank Materials | GBQ345B | Carbon steel |
9 | Thickness (mm) | 6 | |
10 | End Enclosure (mm) | 6 | Flanged flat head |
11 | Stiffener (mm) | 4 | 4 pcs |
12 | Saddle | A2000-S | 2 pcs |
13 | Heating Pipe (mm) | Ø57*3.5 | L=132000 |
14 | Manhole (mm) | DN500 | With overhead nitrogen blanketing valve DN25 |
15 | Asphalt Filling Hole (mm) | DN250 | |
16 | Sheet Gasket | PTFE | |
17 | Anti-leaking Breather Valve (mm) | DN60 | 2 pcs |
18 | Asphalt Protective Frame (mm) | 800*750*150 | With asphalt flooding pipe DN50 |
19 | Thermometer (°C) | 0~300 | |
20 | Volume meter | Ball floating type | |
21 | Reserve Feeding Flange Hole (mm) | DN100 | 2 pcs |
22 | Flange Hole of Asphalt Discharge Hole (mm) | DN100 | |
23 | Asphalt Detecting Value (mm) | DN25 | |
24 | Flange Hole of Heating Pipe (mm) | DN50 | 2 pcs |
25 | Insulated Layer (mm) | 100 | Fiberglass wool |
26 | Exterior Paneling(mm) | 0.6 | Sandwich steel plate plus stainless baling strip with waterproof sealing |
27 | Guardrail of Ladder (mm) | W=400 |
Bitumn Storage Tank 35 m3