Traversing Robot(AB850WDY1)
Double arm
Handy controller:
AD series is applicable to all types of horizontal injection machine of 50~250T for take-out products and sprues. It has ranges of Model AD650/AD750/AD850/AD950/AD1000/AD1100, with two types of arms, single stage and telescopic type; Vertical Stroke: 550~850mm. It can be added with sub arm for three-plate mold to clamp products and sprue at the same time. Its traverse axle can be driven by pneumatic cylinder, inverter motor or AC servo motor. After installed this robot, the productivity will be increased 20~30%, reduce defective rate, ensure safety of operators, reduce manpower and accurately control the output to reduce waste.
General Specification
Power Source | Working Pressure | Max. Allowed Pressure | Drive System | Swivel | Control System |
3 phase AC220v±10v 50/60HZ | 5kgf /cm2 0.49Mpa | 8kgf /cm2 0.8Mpa | S5-AC Servo Motor S3-Pneumatic Cylinder for Sub Arm | 90°Fixed Pneumatic | Micro Computer |
Main Specification
Model | AD650 ID/IS/WD/WS -S3/S5 | AD750 ID/IS/WD/WS -S3/S5 | AD850 ID/IS/WD/WS -S3/S5 | AD950 ID/IS/WD/WS -S3/S5 | AD1000 ID/IS/WD/WS -S3/S5 | AD1100 ID/IS/WD/WS -S3/S5 |
Power Capacity(KVA) | 1.5/2 | 1.5/2 | 2.5/3.8 | 2.5/3.8 | 3/5 | 3/5 |
Recommended IMM(ton) | 50-150 | 80-200 | 120-250 | 200-350 | 350-450 | 350-550 |
Traverse Stroke(mm) | 1250(1450) | 1450(1550) | 1550(1750) | 1800(2000) | ||
Crosswise Stroke(mm) | S3: P:500 R:100 S5:P:500 R:300 | S3: P:500 R:100 S5:P:500 R:300 | S3: P:700 R:100 S5:P:700 R:400 | S3: P:700 R:100 S5:P:700 R:400 | S3: P:900 R:100 S5:P:900 R:500 | S3: P:900 R:100 S5:P:900 R:500 |
Vertical Stroke(mm) | 650 | 750 | 850 | 950 | 1050 | 1150 |
Max. loading(kg) | 5 | 10 | ||||
Dry Take Out Time(sec) | 0.5 | 0.6 | 0.65 | 0.7 | 0.7 | 0.8 |
Dry Cycle Time (sec) | 4.8 | 4.8 | 5 | 5.5 | 5.8 | 6 |
Air Consumption(NI/cycle) | 3 | 5 | ||||
Net Weight(kg) | 180-230 | 185-235 | 210-250 | 220-260 | 335-370 | 355-380 |
Gross Weight(kg) |
|
|
|
|
|
|
Product Size(mm) |
|
|
|
|
|
|
Package Size(mm) |
|
|
|
|
|
|
Denote: "P":product arm "R":runner arm W:telescopic type I:Single stage
D:product arm+runner arm S:product arm
Y3:AC servo motor driven on 3 axis
Y5:AC servo motor driven on 5 axis
Traversing Robot For 200-280T Injection Machine (AB850WDY)