Ads by Google
Laser Scan Micrometer is the high-accuracy survey installment that uses the laser scan to carry on Non-contact the on-line measure. Mainly used in a variety of wires, cables, pipe production line, the measurement of outer diameter and adjust the extruder screw speed or traction speed, to control the purpose of OD. Can also be applied to the outer diameter of workpiece and size measurements.
1. Technical parameters
| Model | Measuring Range | Differentiation | Accuracy |
| LDM-25 | 0.1-25mm | 0.001 | ±0.02%×(Reading)±0.002mm |
| LDM-50 | 0.2-50mm | 0.001 | ±0.02%×(Reading)±0.002mm |
2. The performance indicatorsMeasurement: Laser scanningLaser: Visible red semiconductor laserLaser output power: <2mWOperating voltage: ~ 220V ± 15% 50 - 60HzOperating temperature: -10 ~ 40 °CHumidity: <85% RHWork mode: continuousPower consumption: <30WExternal dimensions:Dimensions: LDM-25/LDM-50 Measuring head: 461mm×80mm×200mm
3. The Device with the following Characteristicsi. Can be connected PLC, industrial computer.ii. RROFIBUS-DP can be allocated and MODBUS converter and PLC, IPC Connect.iii. Can be equipped remote controller DDC-3, DDC-5, on the extruder and automatic
feedback control to control the tolerance, improve product quality, reducing
consumption.
4. Display Controller (Model:DDC-3, DDC-5)i. It be used to remote display and control.ii. Applicable to DC motors, VVVF motor.iii.The controller can control the speed of extruder or the tractor according to the diameter tolerance.Signal distance: More than 500mOutput voltage: ±10VWith RS485 It can connect to PLC industry controlling computer The PROFIBUS-DP or MODBUSCan be selected.External dimensions:164mm×85mm×280mm (Model:DDC-3) 100mm×100mm×120mm (Model:DDC-5)Installation hole size: 152mm×76mm (Model:DDC-3) 90mm×90mm (Model:DDC-5)
Display Controller (Model: DDC-5)
Display Controller (Model:DDC-3)
Laser Scan Micrometer