Ads by Google
Iron baseed plate
Data Application | Density(g/cm3) | Oil Percent(%) | Hardness(HB) | Radial Crushing Strength (X104Pa) | |
Iron-Base | Air Compressor Sealing Washer | ≥7.0 | ≥40 | ||
Bearing | Oiled7.0-7.2 | ≥15 | ≥25-50 | 1.47 | |
Copper-Base Bearing | Oiled5.9-6.3 | ≥15 | 60-110 | 2.45 | |
Hi-Speed Thrust Bearing | Oiled7.8-8.3 | 5-10 | HRG50-80 | ||
Hi-Temp. Bearing | Oiled5.6-6.7 | ≥10 | ≥35 | 1.56-1.96 | |
Anti-Friction Support of Large Electrostatic Precipitator (DU Material) | Specific:10-15MPa | ||||
Friction Coeff:0.05-0.1 |
Material Data & Application | Low Strength Material | Middle Strength Material | High Strength material | ||
Sintered | Heat Treated | Sintered | Heat Treated | ||
Density(g/cm3) | 5.6-6.3 | 6.4-6.8 | >6.8 | ||
Hardness | ≥HB50 | ≥HB120 | ≥HRC30 | ≥HRB82 | ≥HRC50 |
Tensile Strength(MPa) | ≥200 | ≥350 | ≥450 | ≥450 | ≥600 |
Application | Pump Gears, Inn. & ex. Rotator of Pump. | Spline Sleeve, Trans-Gears & Support, Clutch Slipper Yoke. | Auto Synchronizing Hub & Clutch Slipper Yoke, Inclined Disc of No.2 Pump etc. |
Power metallurgic plate Products