Automatic CNC making spring machine 1)wire diameter:0.5-2.0mm 2)high speed and precision machine 3)produce with your drawings Best stability Stainless steel CNC Spring making machine Features Good quality with very competitive price , features on high precision of feeding and shaping, novel and attractive appearance 

1.Two axis can work in high speed single-step or synchronously.2.Computer interface displayed in Chinese and English makeswhich the operation easy.3. Equipped with right or left-handed winding blade rest.4. Make sample by hand wheel.

Technique Parameter 

Model	XD-216
wire diameter	0.5-2.0mm
Max.O.D.	45mm
Max Production Speed	300pcs/mm
Feed Length	Unlimited
Feed Speed	1550m/min
Feed (Y)Axis(kw)	2.7kw
Cam (Y)Axis (kw)	2.7kw
Machine Dimensions	120*120*170cm
Wooden Case Dimensions	130*130*185cm
Machine Weights	1000kgs
Gross Weighs	1100kgs
Power	220V 3P 50/60Hz

Samples

Operating mechanism maintenance

1.Turn off the power.

2. In the use cotton fabric cleaning organization and the radio station the thing, and spreads guards against rust the thin oil.3. Slide precision slide object, do not use high-viscous oil, using only the slide oil lubrication, so as not to affect the linear movement of the slide.  

4. Every six months separately to organization on 1-4 Yellow glib increase bearing grease. 5. Note: Do not use the air spray gun cleaning song hand and slide, in order to avoid the debris, dust and slide chute or the clearance of the rotary structure.

Gear-driven lubrication system

Gears lubrication of the system is divided into x and y axes, and the oil tank is just touching the tooth surface. Oil is not much more, so as to avoid motor oil and fuel tank for 6 months to check 1 timesEvery six months, the replacement cycle oil maintenance, and implemented in accordance with the following steps: Note: The new machine using the full 1000 hours, please be sure to update the new cycle oil.

Wire feeding system

To maintain the cleanliness of feeding servo motor to prevent oil and gas, and dust fall into the servo motor or encoder, resulting in mechanical damage.At least every six months for maintenance or in accordance with the number of machine production, and replace the line feed operation at the same time.Implementation of machine maintenance jobs, follow these steps:

1. Make sure the power is turned off.2. Wipe the parts with cotton cloth, wire feed wheel, sending Line Block, delivers the spindle and other metal surfaces, removal of the mechanical surface debris, oil, grease, dust, and coated with a of antirust thin oil to prevent mechanical corrosion.With the cotton swab to remove the old grease and oil stains on the wire feed drive gear.

3. The transmission tooth gear train gear contact face spreads the gear special-purpose oil lubrication.(Uses OMEGA73 or same level lubricating oil) Attention: Please do not use the air spray gun to be clean, in order to avoid the detritus, the dust fall the slide rails sliding way or in the rotation structure gap

 

 

( function(){ var aBigImageSrc = [ 'http://i01.i.aliimg.com/photo/v6/507262583_1/Multi_purpose_Best_Stability_Automatic_CNC_Spring.jpg' , 'http://i01.i.aliimg.com/photo/v6/507262583_2/Multi_purpose_Best_Stability_Automatic_CNC_Spring.jpg' , 'http://i01.i.aliimg.com/photo/v6/507262583_3/Multi_purpose_Best_Stability_Automatic_CNC_Spring.jpg' , 'http://i01.i.aliimg.com/photo/v6/507262583_4/Multi_purpose_Best_Stability_Automatic_CNC_Spring.jpg' , 'http://i01.i.aliimg.com/photo/v6/507262583_5/Multi_purpose_Best_Stability_Automatic_CNC_Spring.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); Multi purpose Best Stability Automatic CNC Spring Making Machine