CNC wire forming machine 1)wire diameter :0.3-2.3mm 2)high precision forming machine 3)producing different shapes of springs

CNC Universal Automatic Wire Forming Machine (Manufacturer)

Feature

Equipped with the computer-controlled system imported from Taiwan and servo motor imported from JapanA precious inspection tracer device is installed; it will stop working automatically when the unqualified product is foundThe parameters such as major diameter and angle can be modified at any time according to the working status displayed on the fluorescence screenIt is suitable for producing double torsion spring, straight spring, pagoda-shaped compression spring, rectangle spring, swirl spring and other different spring and special-shaped spring.

Specification

wire diameter	0.3--2.3mm
Max.O.D.	40mm
Max Production Speed	<=100
Feed Length	Unlimited
Feed Speed	0--100rpm
Feed (Y)Axis(kw)	2.7kw
Cam (Y)Axis (kw)	2.7kw
Quin Axis(kw)	1kw
Maximum Cam Movement Command Value	9999.99mm
Minimum Cam Movement Command Value	0.02mm
Monitor display	Color/Chinese/English
Cutter minimum	0.1 degree
Cam axis maximum setting value	359.9 degree
Power Consuption	6.4kw
Machine Dimensions	1400*550*1600mm
Wooden Case Dimensions	1600*600*1700mm
Machine Weights	900kg
Gross Weighs	930kg
Power	220V 3P 50/61Hz

Operating mechanism maintenance

Turn off the power.In the use cotton fabric cleaning organization and the radio station the thing, and spreads guards against rust the thin oil.Slide precision slide object, do not use high-viscous oil, using only the slide oil lubrication, so as not to affect the linear movement of the slide.  Every six months separately to organization on 1-4 Yellow glib increase bearing grease. Note: Do not use the air spray gun cleaning song hand and slide, in order to avoid the debris, dust and slide chute or the clearance of the rotary structure.

 

Wire feeding system

To maintain the cleanliness of feeding servo motor to prevent oil and gas, and dust fall into the servo motor or encoder, resulting in mechanical damage.At least every six months for maintenance or in accordance with the number of machine production, and replace the line feed operation at the same time.Implementation of machine maintenance jobs, follow these steps:

Make sure the power is turned off.Wipe the parts with cotton cloth, wire feed wheel, sending Line Block, delivers the spindle and other metal surfaces, removal of the mechanical surface debris, oil, grease, dust, and coated with a of antirust thin oil to prevent mechanical corrosion.With the cotton swab to remove the old grease and oil stains on the wire feed drive gear.The transmission tooth gear train gear contact face spreads the gear special-purpose oil lubrication.(Uses OMEGA73 or same level lubricating oil) Attention: Please do not use the air spray gun to be clean, in order to avoid the detritus, the dust fall the slide rails sliding way or in the rotation structure gap

CNC Universal Automatic Wire Forming Machine (Manufacturer)