TYPE:TJ250/45 Copper Continuous Extrusion Machinery
Machinery content: One line
Item | Machinery content | QTY | |
a) | Feedstock Pay-off | 1 set | |
b) | Feedstock Straighten Unit | 1 set | |
c) | Brush Unit | 1 set | |
d) | Continuous Extrusion Machine | 1 set | |
e) | Hydraulic and Lubricate System | 1 set | |
f) | 300Mpa EHV System | 1 set | |
g) | Water Cooling System | 1 set | |
h) | Product Length Counter | 2set | |
i) | Take-up Stand | 2 set | |
j) | Electric Control system | 1 set | |
k) | Transformer(415v to 380v) | 1 set | |
l) | Spare parts(free) | 1 set | |
m) | Spare parts (Φ8mm) | Wheel | 4 PCS |
Chamber | 10 | ||
Item | contents | Specification |
Specification of TJ250 Machinery: | Wheel Diameter: | 250mm |
Main Motor: | 45KW/1000rpm | |
Rotation Speed: | 1-12.5 rpm | |
Feedstock | Material: Clean up casting copper rod | |
Rod Diameter: | 8mm±0.2mm | |
Tensile strength | <170N/ mm2 | |
Product | Maximum Cross Sectional Area: | 5mm2~65mm2 |
Maximum Width: | 15 mm | |
Output: (average) | 200Kg/h | |
Flash level: (depending on cross-section) | 3-5% | |
Spooler Flange: | 630mm | |
Plant Requirement | Power Supply: | AC 380v Phase, 50 Hz, 65KVA |
Compression Air: | 0.7MPa,2m3/min >0.3MPa, | |
Outer Cooling Water: | 15m3/h | |
Space | 25m X6m |
TJ250/45 Copper Continuous Extrusion Machine