Welcome to ECVERY
tower shot blasting machine
tower shot blasting machine
Supplier Info
[China Supplier]
Contact Person : Mr. Chen Elden
Tel : 86-510-83050580
Fax : 86-510-83050580
Product Detail
1. Energy conservation; 2. High efficiency; 3. Processing good quality; 4. Environmental protection; 5. Labor-intensity;

Tower outer wall automatic shot blasting machine advantages:

1. Energy conservation, total power is 34.69KW, but the traditional sand blasting room total equipments power more than 200KW.

2. High efficiency, it can improve two times efficiency. And the traditional type need about 5 person working 10-12 hours, but it’s only need 2 person working 6-8 hours.

3. Processing good quality, use this kind shot blasting machine, the processing quality can reach up Sa2.5 grade, and with good uniformity.

4. Environmental protection, this is airtight system, and dust almostly not excape, rust environment fresh, eliminate pneumoconiosis.

5. Labor-intensity, it only needs 1-2 person to operating, No need to pay a heavy physical labor.

6. Use less sand, traditional method need more than 20T sands, but it only need 0.5-0.7T sand, and can be recycle.

7. The one-time investment is small, only about 30% -40% of the traditional methods.

Tower inner wall automatic shot blasting machine advantages:

1. Automatic closed circuit recycle system, less sand input, and not lose. Input volumn about 1000kg.

2. Whole speed adjusting by VFD, and matched with the variable frequency motor of rotator, and can be adjusted to any speed which suite for sand blasting.

3. The machine working as ramming head and dust remove system travelling on the special rack in tower, that means the blasting machine can move along with the center of tower, thus make this machine can suite different diameter of tower.

4. High efficiency and Energy conservation, it total power is 49kw, need two worker, and one 28m section tower can be finished within 3 hours, it can save 80% energy compared with traditional blasting room.

5. Environmental protection, rust environment fresh and clean, eliminate pneumoconiosis.

6. Sealed with a special wear-resistant sealing brush polishing head, play both the good results of the sealed, the seals with good durability.Also taking into account the interior parts of a high degree of disorder, to ensure that only a very small amount of leakage of sand and dust.

7. The shot blasting machine don’t need air compressor, and ramming bead part negative pressure working.

tower shot blasting machine

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.