Technical parameters
Model | DIW-60L | |
Punching pressure(ton) | 60 | 60 |
Max.shearing thickness of steel plates | 16mm | 0.63(inch) |
Strength of steel plates(N/mm ²) | 450 | 450 |
Angle of shearing | 7° | 7° |
Max.shearing area | 8x400mm | 0.31x15.75(inch) |
Shearing sizes of one stroke | 16x250mm | 0.63x9.84(inch) |
Ram stroke | 80mm | 3.15(inch) |
Number of stroke(times/min) | 8-22 | 8-22 |
Depth of throat | 300mm | 11.81(inch) |
Punching thickness | 16mm | 0.63(inch) |
Max.diameter of punching | 25mm | 0.98(inch) |
Section | ||
Round steel | 45 | 1.77 |
Square steel | 40x40 | 1.57x1.57 |
L Shearing of equal-angle steel 90°-90° | 120x120x12 | 4.72x4.72x0.47 |
L Shearing of equal-angle steel45°-45° | 70x70x8 | 2.76x2.76x0.31 |
T Shearing of T-bar90°-90° | 120x60x12 | 4.72x2.36x0.47 |
I I beam steel | 126x74x5 | 1.96x2.91x0.20 |
C C-Channel steel | 126x53x5.5 | 4.96x2.09x0.22 |
Main motor power(KW) | 4/5.5 | 4/5.5 |
Dimension(L×W×H) | 1650x800x1780 | 64.96x31.50x70.08 |
Hydraulic Ironworker