product features:
The machine tool is widely used in processing and manufacturing of high-precision complex parts of electrical and instrumentation industry, automobile, motorcycle, fasteners, bearings, photographic equipment, film machinery, hardware tools, watches, glasses, stationery, motors, valves and gas pipe and so on. It is the best and the most efficient equipment of the hardware machining industry.
CK6160 Numerical Control Lathe is elegant in appearance, reasonable in structure, wide in use and convenient in operation.
Its spindle is supported by high-precision rolling bearing, which realizes high turning precision, the carriage in vertical and horizontal direction is driven by high-precision ball screw, which realizes good dynamic performance and high positioning accuracy.
The machine tool adopt cast iron with the hardness of more than HRC45°C after VHF hardening as the material, ensure the machining precision stably in a long-term manner.
Considering vibration during turning, the base of high strength and widened extension unit is designed, which is particularly suitable for powerful turning.
Form of workpiece clamping: (1). Three-jaw chuck (2). Spring collect for user to choose.
The automatic feeding rack can be selected optionally according to user requests.
Item | CK6150 |
Swing over bed | Φ600 |
Max swing diameter of carriage | Φ400 |
Max processing length | 1500 |
Spindle nose | A2-8 outer cone with flange |
Through-hole diameter of spindle | Φ82 mm/Φ130 mm |
X/Z-axis repeatability | 0.012/0.02 |
X axis travel | 300 |
Z axis travel | 1550 |
X-axis rapid traverse rate | 5 |
Z-axis rapid traverse rate | 8 |
Spindle speed range | 80-700 |
Width of guide way | 283 |
Center distance of guide way | 283 |
Taper of tailstock sleeve | MT5# |
Tailstock sleeve stroke | 110 |
Type of tool carrier | 4 position electrical tool post |
Main motor power | 7.5 |
L×W×H | 3600×1300×1680 |
Weight | 3150 |
Numerical Control Lathe CK6160