Adjustable turning speed have export quality lincese in rolling machine Easy operation

--W11 series symmetric plate rolling machine with 3 rollers is a metal forming machine for bending,rounding,rolling coiling metal plate

---The very high rotation power is a guarantee of the W11’s superior rolling torque and speed, available without loss of energy as all three rolls are driven independently by hydro-motors and gearboxes directly coupled to the rolls shafts.

----The W11 series is the most precise 3-roll machine in its category. The RGS design reduces to a minimum the distance between the bending points guaranteeing higher bending accuracy.

--lift upper rolls to upper limit position, the balance frame press the upper rolls end , then upper rolls in balance position through bearing seat support and balance frame press, it is easy to keep tuning bearing seat to tuning and close. there is limit switch to check upper rolls position

Specification	Max roll Thickness(mm)	Max roll width (mm)	Yield strength(Mpa)	Roll speed(m/min)	Min roll dia(mm)	Upper roller dia(mm)	down rollers dia(mm)	bottom rollers distance(mm)	Motor(kw)	Dimension(mm)
W11-4X1500	4	1500	245	5	300	150	140	185	3	2900x720x1000
W11-6X1500	6	1500	245	5	380	160	140	220	4	2900x720x1000
W11-6X3200	6	3200	245	4.5	380	220	180	280	7.5	4850x1100x1100
W11-8X2000	8	2000	245	4.5	400	185	170	260	5.5	3700x820x1050
W11-12X2000	12	2000	245	4.5	550	240	180	280	7.5	3650x1100x1100
W11-12X3000	12	3000	245	4	700	280	240	360	11	4900x1300x1300
W11-16X2000	16	2000	245	4	600	260	220	320	7.5	3700x920x1200
W11-16X3200	16	3200	245	4	850	340	260	430	15	5300x1400x1400
W11-20X2500	20	2500	245	4	850	340	260	430	15	4600x1400x1400
W11-25X2500	25	2500	245	4	900	370	270	480	22	5600x1550x2000
W11-30X3200	30	3200	245	4	1200	480	400	600	37	7600×2300×2600
W11-40X2000	40	2000	245	4	1200	500	400	600	37	6400×2300×2800
W11-50X3000	50	3000	245	4	2000	600	480	700	60	9900×3100×3500
W11-60X3000	60	3000	245	4	2000	700	560	800	75	9700×3200×2700

manual metal plate rolling machine