Ads by Google
GS shafting CNC
The main technical parameters:
Quenching machine tool | LP-SK-600 | LP-SK-1000 | LP-SK-1200 | LP-SK-1500 | LP-SK-2000 | LP-SK-2500 | LP-SK-3000 | LP-SK-4000 |
Models | 600 | 1000 | 1200 | 1500 | 2000 | 2500 | 3000 | 4000 |
biggest quenching longth(MM) | 600 | 1000 | 1200 | 1500 | 2000 | 2500 | 3000 | 4000 |
max tactical diameter(mm) | ≤φ500 | ≤φ500 | ≤φ500 | ≤φ500 | ≤φ500 | ≤φ500 | ≤φ500 | ≤φ500 |
workpiece move speed(mm/s) | 2-60 | 2-60 | 2-60 | 2-60 | 2-60 | 2-60 | 2-60 | 2-60 |
rotation speed(r/min) | 40-150 | 40-150 | 30-150 | 30-150 | 25-125 | 25-125 | 25-125 | 25-125 |
Tip moving speed(mm/min) | 480 | 480 | 480 | 480 | 480 | 480 | 480 | 480 |
workpiece weight(kg) | ≤50 | ≤80 | ≤100 | ≤150 | ≤800 | ≤1000 | ≤1200 | ≤1500 |
Input voltage(V) | two phase 380 | two phase 380 | two phase 380 | two phase 380 | three phase 380 | two phase 380 | two phase 380 | three phase 380 |
totally motor power(kw) | 1.1 | 1.1 | 1.2 | 1.5 | 2 | 2.2 | 2.5 | 3 |
quenching workpieces per time | single/double | single/double | single | single | single | single | single | single |
The main features:
:1. adopt PC-industrial digital control systems, high performance, debug and easy to use,
2, the machine can achieve quenching mode: continuous scan quenching, and quenching, sub-continuous scanning quenching (by the level of sub-setting, no limit switch, the same below), while sub-quenching.
3.suitable for a variety of shaft, step shaft, gear shaft, cam shaft, axle, the cylindrical disk-type parts, end so on.
4, the machine control system for reserve electrical heating and cooling water quenching control interface.
6, the fuselage structure by profile, low cost, light weight, economical and practical.
7, easy maintenance, low failure rate, no leakage.
8 high degree of automation and production efficiency.
9, rail uses linear bearings, high precision, small friction, long life.
10, with heavy equipment through the sprocket, chain balance the weight.
your satisfication,our pleasure.
GS shafting CNC