Welcome to ECVERY
coating mg powder
coating mg powder
Supplier Info
[China Supplier]
Contact Person : Mr. Luo Romin
Tel : 0086-731-57888561
Fax : 0086-731-57336895
Product Detail
1.ISO9001:2008 2.ISO14001:2004 3.supply to famous steel companies 4.good at molten iron desulphurization

Usage: mainly used for desulphurization pretreatment in molten iron

Appearance:silver-gray spherical granules, with 0.5-1.6mm diameter (can be changed according to user’s request )            Rests angle (IC):smaller than 26° Density of relax stack: 1.0g/cm3Burning point: in average, not lower than 600 °C. Burning-resistant time at high temperature: not less than 15---18 second at 1000°CProduction technology characteristic:machine-cutting processed, then sphericizing and coating processedPackage:double layer sealed package. The inner layer of the package is a polyethylene film and the outer one is a flexible collecting bag. Each bag is with net weight of 1,000 kilograms. According to the user’s request, packaging materials may also be provided by usersTransportation cautions: water-proof and moisture-proof are needed, but fire-proof and explosion-proof are not necessary. When road or railway transportations are implemented, trays are needed under the packing sacks and covers too, on the top of them as shelters from rain, snow etc. Containers must be used for marine transportationStorage: should be separately put on trays, in dry and well ventilated storehouse with roof to avoid water contactWarranty time: six months after delivery.

Physics and chemistry targe

Chemical composition % ( Weight )

Size composition % ( Weight )

Magnesium content ( mg )

Coating

0.5 —— 1.6mm

Irregular granularity

≥ 92

≤ 5

92%

≤ 8

Notice: Granules should not stick with each other and with other mechanical impurities . Irregular granularity indicates: in length more than 3mm acicular granules or granules with long tails

Rest angle (IC): smaller than 26°

Density of relax stack: 1.0g /cm3

Burning point: not lower than 600 °C in average

Burning-resistant time at high temperature: not less than 15---18 second at 1,000 °C.

Magnesium content in granules before coating: 99.95%.

Content of magnesium after the coating: 92 –98% according to user's request.

coating mg powder

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.