Ads by Google
Bus bar Ribbon / Tin coated copper wire Application scope:
It shall increase the efficiency of battery, lower the cost and improve the quality and pass rate for the manufacturer.
PV Ribbon Material | Cu99.99% |
Plating thickness | 0.015 ~ 0.03 mm |
Visual | 1). There shall be no flows. | ||||||||
2). Thsurface shall be uniformly lustrous hue. | |||||||||
3). The surface shall be free from thick |
Coating process : Hot-dip tinning
Tensile: Extra soft, < 235 MPa
E
5.1 Chemical Composition | ||||||||||||
Item | Specification | |||||||||||
Composition | Impurity | |||||||||||
Solder | Sn | Pb | Cu | Sb | Zn | Fe | As | Ni | Bi | Cd | Al | |
63 | Bal. | <0.03 | <0.1 | <0.002 | <0.02 | <0.03 | <0.01 | <0.1 | <0.002 | <0.002 | ||
±1.0 | ||||||||||||
5.2 Physical Characteristic | ||||||||||||
Alloy Designation | Melting Point | Specific Gravity | ||||||||||
Sn63/Pb37 | 183°C | 8.4g/cm3 | ||||||||||
5.3 Solderability | ||||||||||||
Item | Specific | Test Methods | ||||||||||
Spread Factor | >93% | JIS Z3197-86 | ||||||||||
Bus bar ribbon