1.Purity:>=99.95%molybdenum 2.Density:10.2g/cm3 3.Certification:ISO9001:2000 4.Thickness:below 0.05mm molybdenum foil,foils

Material below .005 inches in thickness is classified as foil. Typical uses for it are production of drawn parts, electronic components, metallizing sources, furnace insulation and chemically etched parts. Molybdenum foil has the ability to be etched into fine patterns, which makes it useful to the semiconductor industry. Standard availability is described below. Other sizes and tolerances are quoted on request.

ThicknessMax. Width

.001" - .002"	12"
.002" - .003"	12"
.003" - .005"	12"

Molybdenum Foil Standard Thickness Tolerance

Thickness.25" to 4.0"4" to 6"7" to 16"

.001" - .003"	± .0003"	± .0003"	± .0004"
.0031" - .004 "	± .0003"	± .0004"	± .0004"
.0041" - .005 "	± .0005"	± .0005"	± .0005"

Molybdenum Foil Standard Width Tolerance

Thickness.25" to 6"6" to 12"

.001" - .004"	± .008"	± .012"
.004" - .005"	± .010"	± .015"

Surface ConditionSurface can be supplied in a mirror or matte finish; dependent upon thickness and width parameters.

Heat TreatmentMolybdenum flat products are rolled and annealed to provide the optimum condition for the desired end use (Furnace, Punch, Deep Draw).

 

ASTM molybdenum foil