Welcome to ECVERY
Fracturing Package Auxiliary Equipments
Fracturing Package Auxiliary Equipments
Supplier Info
[China Supplier]
Contact Person : Ms. Song Nancy
Tel : 86-755-86051797
Fax : 86-755-86051795
Product Detail
High and low pressure manifold are separated which are convenient for placement . The high pressure manifold is mainly composed

                                               Fracturing Package Auxiliary Equipments

MS-1000 Manifold Skid

High and low pressure manifold are separated which are convenient for placement .

The high pressure manifold is mainly composed of high pressure plug valve ,needle valve ,tee, high pressure straight pipe ,etc, with pressure 15000 Psi(105Mpa).

Overall dimension (low pressure manifold skid):2100(L)*960(W)*500(H)

Overall dimension (high pressure manifold skid) :2000(L)*1400(W) *800(H)

FL-5 Filter Skid

The filer skid is composed of skid frame, filter, circuitry, two centrifugal pumps and relevant inlet & outlet pipes.

Two sets of filtering systems can be switched on or off via relevant valves as required ,

The filter skid filters the preflush and transports the preflush from cabin to blender on platform which meets the requirement for sand control of entire equipment in offshore.

General specification

 Filtering medium :sea water

 Filtering capacity : continuous working 4 hours .filtering capacity is no less than 1.6m3/min.

 Filtering area :46m3   Filter core area:5um

 Discharge rate of each centrifugal pump:1.67m3/min

 Discharge pressure of centrifugal pump:0.35Mpa

 Overall dimension(mm):4650(L)*2250(w)*2950(H)   Weight; <5t

LS-20 Preflush Tank Skid

 It’s composed of skid frame, measuring tank, hydraulic motor, RA56 centrifugal pump, external dynamic pipeline ,suction piping system, water supply pipes and observation platform

 Two pumps can work independently . One pump for suction ,another for discharge; both can be for suction or discharge,

 When pump is not being used ,turn on./off butterfly valve to switch between outlet and inlet.

Job arrangement and connection of pipelines are very convenient use,

 General specification

 Max. discharge rate of centrifugal pump:3.2m3/min

 Discharge pressure of centrifugal pump:0.35Mpa

 Overall dimension(mm) :5600(L)*2200(W)*2400(H)

US-5 Sand Collector Skid

 Sand collector skid is used as auxiliary equipment for sand control to filter and deposit

 Sand carrier on the equipment so as to recycle and reduce the pollution

 Sand collector skid is composed of skid frame ,sand collector ,centrifugal pump, piping system, observation platform and circuitry

 Sand collector skid is installed with filtering cradle ,filtering hole diameter:10mm

Basic performance parameters

 Max. discharge rate of centrifugal pump: 16BBL/min(2.6m3/min)

 Discharge pressure of centrifugal pump: 46Psi (0.32Mpa)

 Electric motor power:22KW

 Rotation speed: 2960RPM

 Power supply :380v/50HZ

 Overall dimension(mm):3100(L)*2300(W)*2500(H)

 Weight :less than 4t

Fracturing Package Auxiliary Equipments

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.