Welcome to ECVERY
BIKE STAND, BICYCLE STAND,SUPERSTAND,STAND
BIKE STAND, BICYCLE STAND,SUPERSTAND,STAND
Supplier Info
[China Supplier]
Contact Person : Mr. Li Da
Tel : 86-574-88311429
Fax : 86-574-88312656
Product Detail
Fit and loosely screw the top hoop to the wo base bends first.

1) Fit and loosely screw the top hoop to the wo base bends first.

2) The base bent rails are right & left sided. Assemble them so that the screw heads fit against the recessed side of the holes.

3) Loosely assemble and screw the complete stand together as per the illustration with the supplied screws & assembly tool.

4) Puhs the rubber feet onto each leg end.

5) Square-up the stand on a flat surface & tighten all of the screws.

6) Adjust the stand again if necessary & retighten he screws.

BIKE STAND, BICYCLE STAND,SUPERSTAND,STAND

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.